Using Pre-Dialling
•Enter the number of the handset you wish to call.
•Press 
.
•The call will be connected.
Note: During an internal call, if an external call comes through, you will hear short beeps. 
icon on handset will blink.
Receiving external call during Internal Call
If an external call comes in while the handset is on internal call, the 
icon will be blinking and a series of short beeps can be heard from the earpiece. The CID of the caller will be displayed on the screen.
•Press 
to hang up the internal call.
•Press 
again to answer the external call.
Inquiry Call
While talking on the external line, the handset can put the external call on hold and make an inquiry call to another handset. The handset can then toggle between the external call and the other handset. While the external call is on hold, a tone will be emitted to the external party to indicate that the call is on hold.
•During an external call, press 
.
•The external call will be put on hold and internal dialling tone can be heard from the earpiece or speaker.
•The 
icon is displayed in addition to 
and 
icons.
•Press the number of the handset you wish to call.
•If there is no reply, press 
again to reconnect to the external
call and the other handset will stop ringing. Press 
again to make another call to other handset number.
•When the other handset answers the call, the two handsets can communicate while keeping the external call on hold.
•Press 
to toggle between the internal and external calls.
Call Transfer
You can transfer phone calls to other handsets registered to the same base unit.
•During an external call, press 
.
•The external call will be put on hold.
•The 
icon is displayed in addition to 
and 
icons.
•Press the number of the handset you wish to call.
•When the other handset answers the call, press 
on the handset or place the handset on the cradle will transfer the call.
The 
and 
icons will be turned off.
Conference Call
Conference call can be activated between external call, and two handsets.
•During an external call, press 
.
•The external call will be put on hold.
•The 
icon is displayed in addition to 
and 
icons.
•Press the number of the handset you wish to call.
•When the other handset answers the call, press and hold the 
will activate the conference call. The 
icon on both handsets will be turned on.
•During the conference call, pressing the 
on the handset, which initiated the conference call, will put the external call on hold and still connect with the other handset.
•Press 
again on the first handset will put the other handset on hold and connect with the external call.
•Pressing and holding 
will activate the conference call again.
38 of 42
