Press on the handset. The handset will read SEARCH BASE X while it searches for the base unit (where ‘X’ is the number of the base you are registering to).

Once a connection has been made, the handset name and number will be shown on the display.

Base Selection

AUTO

If the base selection setting is set to auto, whenever the

 

handset loses link or is powered up, it will search any

 

available registered base to connect.

PREFER

One of the bases registered can be assigned as a

 

preferred base so that it will be searched for certain period

 

when the handset loses link or is powered up. If that base

 

cannot be found, the handset will search for other

 

registered bases to connect.

FIXED

One of the bases registered can be assigned as a fixed

 

base so that it will be the only base to be searched when

 

the handset loses link or is powered up. If that base cannot

 

be found, the handset will not link up to any other base.

To set:

Press . Use to select SYSTEM.

Press . Use to select SELECT BASE.

To select AUTO,

o Press . Use to select AUTO.

o Press to confirm. The handset will search any available registered base.

To select PREFER,

o Press . Use to select PREFER.

oPress . The display reads BS 1 2 3 4.

oUse the numeric keys to enter the base number to be set as the preferred base.

oPress to confirm. The handset will search the selected base.

To select Fixed base,

oPress . Use to select FIXED.

oPress . The display reads BS 1 2 3 4.

oUse the numeric keys to enter the base number to be set as the fixed base.

oPress to confirm. The handset will search the selected base.

Note: Base selection setting will change to auto when the handset is registered to a base.

Making Internal Calls

This feature requires more than one handset registered to the same base.

During standby, press .

The icon on handset will be turned on.

Press the registered handset number you wish to call.

The other handset will ring. Answer the call from that handset and two handsets can now talk.

To end a call

Press , or

Place the handset back on the base unit.

37 of 42

Page 37
Image 37
Oricom S6000 manual Base Selection, Making Internal Calls