Linksys SRW224P manual Appendix a Fast Ethernet and Gigabit Ethernet, About Fast Ethernet

Page 91

24-Port 10/100 + 2-Port Gigabit Switch with Webview and Power over Ethernet

Appendix A: Fast Ethernet and Gigabit Ethernet

About Fast Ethernet

1.As the demand for desktop video, multimedia development, imaging, and other speed-intensive applications continues to rise, the need for high performance, fault tolerant LAN technology will become more critical.

2.Standard Ethernet, which has been the most popular networking technology to date with a maximum data throughput of 10Mbps (Megabits per second), is becoming insufficient to handle the latest video, multimedia, and other speed-intensive client/server LAN applications.

3.Among the solutions to the problem of network speed, Fast Ethernet has emerged as the most viable and economical. Capable of sending and receiving data at 100Mbps, it is more than fast enough to handle even the most demanding video and other real-time applications.

4.Although there are a number of different competing Fast Ethernet implementations, 100BaseTX is by far the most popular. Operating on two pairs of Category 5 unshielded twisted-pair (UTP) cabling, 100BaseTX supports high speed signaling and is relatively inexpensive. Because it uses four wires for data transmission and the same packet format, packet length, error control, and management information as 10BaseT, 100BaseTX can be made to communicate with slower 10BaseT equipment when routed through a switch.

5.This backwards compatibility is one of 100BaseTX's major advantages over other forms of Fast Ethernet; it allows critical, speed-dependent network segments to be upgraded to 100BaseTX speeds as needed without re-wiring, refitting, and retraining an entire site. Networks can now mix both slow and fast network segments for different users or departments. Publishing, R&D, video, multimedia, or accounting departments can enjoy a 100Mbps pace, while other corporate segments can operate at slower and more affordable 10Mbps speeds.

About Gigabit Ethernet

Gigabit Ethernet runs at speeds of 1Gbps (Gigabit per second), ten times faster than 100Mbps Fast Ethernet, but it still integrates seamlessly with 100Mbps Fast Ethernet hardware. Users can connect Gigabit Ethernet hardware with either fiber optic cabling or copper Category 5 cabling, with fiber optics more suited for network backbones. As the new Gigabit standard gradually integrates into existing networks, current computer applications will enjoy faster access time for network data, hardware, and Internet connections.

Appendix A: Fast Ethernet and Gigabit Ethernet

83

About Fast Ethernet

Page 90 Page 92
Image 91
Page 90 Page 92
Contents Port 10/100 + 2-Port Gigabit Switch Copyright and Trademarks How to Use This User GuideTable of Contents About Fast Ethernet About Gigabit Ethernet Appendix a Fast Ethernet and Gigabit EthernetAppendix B Cabling HelpFront Panel List of Figures24 Port Configuration 28 QoS IP Precedence/DSCP 61 Spanning Tree Port/LAG Info Welcome IntroductionWhat’s in this Guide? Front Panel Getting to Know the SwitchLEDs Side Panel Back PanelPorts Gigabit Expansion Ports RJ-45 PortsConsole Port Overview Connecting the SwitchMaximum Cabling Distances Fast Ethernet Considerations Pre-Installation ConsiderationsPlacement Options Hardware InstallationDesktop Placement Rack-Mount Placement Uplinking the SwitchConfiguring the HyperTerminal Application Configuration using the Console InterfaceSwitch Screens Configuring the Switch through the Console InterfaceSwitch Main Menu General Information VersionsSerial Port Configuration Management SettingsCPU Performance 13 User and Password Settings User and Password SettingsIP Address Settings IP ConfigurationSnmp Network Configuration19 File Management File ManagementReboot System Restore System Default Setting22 Back to Main Menu Back to Main MenuPort Status Port ConfigurationSystem PoE Configuration PoE ConfigurationPort PoE Status Logout Port PoE ConfigurationConfiguring the Switch through the Web Utility System Description System InformationSys. Info System Mode System ModeForwarding Database Address Table SettingsStatic address Dynamic AddressSys. Info Time Synchronization Screen Time Synchronization10 Sys. Info CPU Performance CPU PerformanceIP Address IP ConfigConfiguring the Switch through the Web Utility IP Config Port Configuration Switch Config14 Edit Port Configuration Screen Edit Port ConfigurationConfiguring the Switch through the Web Utility Switch Config Vlan 16 Adding/Editing Vlan Screen Create VlanVlan Port 17 Switch Config Vlan Port18 Switch Config LAG Configuration LAG ConfigurationCreate LAG Vlan LAG ConfigurationLAG Broadcast Control Port Mirroring 22 Switch Config Port MirroringLacp Membership LacpQoS Traffic Type Class of Service SettingsCoS to Queue Queue Settings28 QoS IP Precedence/DSCP IP Precedence/DSCP29 QoS IP Port IP Port30 QoS ACL Priority ACL PriorityRate Limit Rate Limit ConfigurationDiffServ DiffServ Class Map Setting Rules34 DiffServ Class Map Adding a Class Adding a ClassAdding a Policy DiffServ Policy Map37 DiffServ Policy Map Setting Rules 38 DiffServ Diffserv Service Policy DiffServ Service PolicyACL Conf SecurityExtended ACL Standard ACLConfiguring the Switch through the Web Utility Security MAC ACL 802.1xUsers ACL Port Binding44 Security 802.1x Users Radius Server 802.1xPort ConfStorm Control Port SecuritySystem Password Https SettingsSntp Global SettingsInterface Statistics StatisticsRmon Statistics Etherlike StatisticsPoE Power ConfigPower Port Status Power Port ConfigSoftware Version Power StatusSpanning Tree 59 Spanning Tree Information InformationPort/LAG Info Configuration62 Spanning Tree Information Port/LAG ConfSnmp Snmp ConfigIgmp 64 Igmp Igmp Conf Igmp ConfIgmp Router Conf Igmp Router InfoIgmp Member Conf IP Multicast Reg TableReset MaintenanceFile Download Save Config Restore DefaultsFile Upload Integrated Cable Test HelpAbout Fast Ethernet Appendix a Fast Ethernet and Gigabit EthernetAbout Gigabit Ethernet Twisted Pair Cabling Appendix B CablingFiber Optic Cabling Appendix C Glossary Appendix C Glossary Appendix C Glossary System, Link/Act, PoE, Speed, Gigabit 1, Gigabit Appendix D SpecificationsStandards Ieee Std Ports Cabling Type UTP CAT 5e or better LEDsLimited Warranty Appendix E Warranty InformationFCC Statement Appendix F Regulatory InformationPage Power Cord Set Cable de longueur inferieure a` 2 metres Environmental Statement Page Need to contact Linksys? Appendix G Contact InformationInformation section in this Guide

SRW224P specifications

The Linksys SRW224P is a versatile and efficient managed switch that caters to the needs of small to medium-sized businesses. This Layer 2 switch stands out with its robust functionality and user-friendly design, making it an ideal choice for networking professionals looking to enhance their network infrastructure.

One of the standout features of the SRW224P is its 24 Gigabit Ethernet ports, which provide high-speed connectivity for various devices across the network. This is particularly beneficial in environments with bandwidth-hungry applications, such as data transfers, video conferencing, and online collaboration tools. Additionally, the switch comes with 2 dual-personality ports that can be used as either Gigabit Ethernet or SFP (Small Form-factor Pluggable) ports, allowing for flexible and scalable network setups.

Power over Ethernet (PoE) capability is another significant aspect of the SRW224P. With a total PoE output of up to 370 watts, the switch can power devices such as IP cameras, VoIP phones, and wireless access points directly through the Ethernet cable, simplifying the installation process and reducing cable clutter. This feature is particularly advantageous for organizations seeking to deploy network devices in areas where power outlets are limited.

The SRW224P also boasts advanced management features, including VLAN support for segmenting network traffic, Quality of Service (QoS) for prioritizing critical applications, and Spanning Tree Protocol (STP) for redundant network paths. These capabilities enhance network performance and reliability, ensuring that users experience minimal downtime and efficient data flow.

Security is a top priority with the SRW224P, which includes features such as port security, access control lists (ACLs), and DHCP snooping. These measures help protect the network from unauthorized access and potential attacks, safeguarding sensitive information and maintaining operational integrity.

In terms of user interface, the Linksys SRW224P is equipped with a web-based management interface that allows for easy configuration and monitoring. This intuitive interface enables IT administrators to manage the switch remotely, providing real-time insights into network performance and facilitating troubleshooting.

Overall, the Linksys SRW224P managed switch combines high performance, advanced features, and security measures that make it a reliable choice for businesses aiming to optimize their network infrastructure. Its PoE capabilities, extensive port options, and management features ensure that it meets the demands of modern networking environments, making it a valuable asset for any organization.
Top Page Image Contents