
24-port  10/100 + 2-Port  Gigabit Switch with WebView
If you change from an 802.1q VLAN mode to a 
PortBased VLAN Mode
The VLAN Group list will display the existing VLAN groups.To add a VLAN group, click Add New. To delete a group from the list, click Delete.
Click Apply to save the changes.
Add a PortBased VLAN Group
To add a PortBased VLAN group, enter an identifying number between 1 and 255 in the Group ID field. Select Member from the 
Chapter 5: Configuring the Switch through the Web Utility
Figure 5-13:  Mode Change
Figure 5-14:  Port Based VLAN
Figure 5-15:  Add a Port Base VLAN Group
25
VLAN Tab