Linksys WAP11 v.2.6 manual Filter Tab

Page 17

Instant Wireless® Series

New firmware versions are posted at www.linksys.com and can be downloaded for free. If the Access Point is not experiencing difficulties, then there is no need to download a more recent firmware version, unless that version has a new feature that you want to use. Loading new firmware does not always enhance the speed or quality of your Internet connection.

Note: When you upgrade the Access Point’s firmware, you may lose the Access Point’s current configuration settings.

To upgrade the Access Point’s firmware:

1.Download the firmware upgrade file from the Linksys website.

2.Extract the firmware upgrade file.

3.Click the Upgrade Firmware button on the Help screen.

4.Enter the location of the firmware upgrade file in the File Path field, or click the Browse button to find the firmware upgrade file.

5.Double-click the firmware upgrade file.

6.Click the Upgrade button, and follow the on-screen instructions.

Click the Cancel button to cancel the firmware upgrade.

The Filter Tab

To access the Filter tab, first click the Advanced tab. The Filter tab, shown in Figure 6-11, allows you to control which computers may or may not commu- nicate with the Access Point—depending on their MAC addresses.

To enable filtering of computers by their MAC Addresses, click the Enable radio button. To disable this feature, click the Disable radio button.

Next, determine if the Access Point will deny access only to the MAC address- es you will specify, OR if the Access Point will allow access only to the MAC Addresses you will specify. Click the radio button next to the option that is appropriate.

Above the MAC Address fields, there is a pull-down menu. This pull-down menu is for selecting the number of computers on your wireless network. For computers one through ten on your wireless network, 1~10 is selected by default. If you have more than ten computers on your wireless network, use this pull-down menu to select 11~20, 21~30, etc., up to a maximum of 50 MAC Addresses.

Wireless Network Access Point

Figure 6-11

Then, type the MAC Address(es) you wish to filter in the MAC Address fields.

When you’ve completed making any changes on this tab, click the Apply but- ton to save those changes or Undo to cancel your changes. For more informa- tion on this tab, click the Help button.

26

27

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Wireless Network Access Point Mail Table of Contents Introduction Instant Wireless Network Access PointFeatures Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Wireless Network Access Point’s LEDs Wireless Network Access Point’s PortsConnecting the Wireless Network Access Point Instant Wireless Series Instant Wireless Series Instant Wireless Series Setup Tab Configuring the Wireless Network Access PointSetting WEP Encryption Setting the AP Mode Password Tab Status Tab LANHelp Tab Log TabFilter Tab Wireless Tab Frequently Asked Questions Appendix a TroubleshootingWhat is infrastructure mode? Setting Up TCP/IP in Windows What is a MAC Address?TCP/IP Setup for Windows TCP/IP Setup for Windows 98 and MillenniumAppendix C Glossary TCP/IP Setup for Windows XPInstant Wireless Series Instant Wireless Series Instant Wireless Series Appendix D Specifications Environmental Appendix E Warranty InformationAppendix F Contact Information Copyright 2003 Linksys, All Rights Reserved
Top Page Image Contents