Linksys WAP11 v.2.6 manual Instant Wireless Series

Instant Wireless® Series

Figure 5-1

3.You can configure the Access Point through any PC connected to your Ethernet network. Make sure the Access Point is connected to one of your network switches or hubs. Click the Next button to continue or Exit to exit the Setup Wizard.

Figure 5-2

Wireless Network Access Point

4.The next screen to appear, shown in Figure 5-3, will display a list of access points on your network, along with the status information for each access point. If there is only one access point on your network, it will be the only one displayed. If there are more than one displayed, select the Access Point by clicking on it, and click the Yes button to continue or No to exit the Setup Wizard.

Figure 5-3

5.On the Enter Network Password screen, enter the default password, admin, in the Password field. Then click the OK button. For added security, remember to change this password later through the Web-based Utility’s Password screen.

Figure 5-4

8 9