Advantech ADAM-4561 Specifications, Package Checklist, Transmission speed 75 bps to 115.2 Kbps

Page 14
1.3Specifications

1.3Specifications

Compatibility: USB v1.1 standard

Interface: Network: USB

Serial: 3-wire RS-232, RS-422, RS-485

Port: 1 Independent RS-232/422/485 ports

Connector: Network:USB-type A connector Type A to B cable provided Serial: twist-pair cable

Transmission speed: 75 bps to 115.2 Kbps

Parity bit: odd, even, none

Data bit: 5, 6, 7, 8

Stop bit: 1, 1.5, 2

RS-232Signals: Tx, Rx, GND

Isolation protection: 3,000 V

Driver Supported: Windows 98/ME/2000

If you have Linux driver needs, please contact Advantech directly.

Power Consumption: 1.5W@5V (Windows98/ME/200)

Max. Distance: 15 ft (4.6m)

Case: ABS+PC with captive mounting hardware

Placement: DIN-rail, panel mounting, piggyback stack

Operating Temperature: 0 to 70° C

Storage Temperature: -25° to 80° C

Operating Humidity: 20% to 95% (non-condensing)

Storage Humidity: 0% to 95% (non-condensing)

1.4Package Checklist

ADAM-4561

ADAM CD containing ADAM-4561 User Manual and Driver

One Type A to Type B USB cable

NYLON DIN-rail Mounting Adapter

SECC Panel Mounting Bracket

ADAM-4561 User Manual

4

Image 14
Contents ADAM-4561 User Manual1-Port Isolated USB to RS-232/422/485 Converter Edition CopyrightAcknowledgements Printed in TaiwanProduct Warranty 2 years Declaration of Conformity CE FCC Class AFCC Class B Technical Support and AssistanceSafety Instructions 20 C -4 F OR ABOVE 60 C 140 F. THIS COULD DAM viii Chapter ContentsInstallation & Setup OverviewPage Overview CHAPTERChapter 1 Overview 1.1 Introduction1.2 Features Transmission speed 75 bps to 115.2 Kbps 1.3 Specifications1.4 Package Checklist Data bit 5, 6, 7 Stop bit 1, 1.5Installation & Setup 2.1.1 Network Architecture Chapter 2 Installation & Setup2.1 Hardware Installation Figure 2.1 Network Architecture2.1.2 Network Connection Wiring for RS-232 ConnectionFigure 2.2 Wiring of RS-232 Connection 2.1.3 Serial ConnectionWiring of RS-422 Connection Wiring of RS-485 ConnectionFigure 2.3 Wiring of RS-485 Connection Figure 2.4 Wiring of RS-422 Connection2.1.4 Jumper Settings 2.2 Software Installation 2.2.1 Driver and Utility InstallationChapter2 After the installation is complete, you will see the dialog window shown by figure below appearing. Click the “Finish” button to complete the installation
Related manuals
Manual 22 pages 3.8 Kb