Advantech ADAM-4561 user manual Declaration of Conformity CE, FCC Class A

Page 4

Declaration of Conformity

CE

This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.

CE

This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recom- mend the use of CE-compliant industrial enclosure products.

FCC Class A

Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environ- ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera- tion of this equipment in a residential area is likely to cause harmful inter- ference in which case the user will be required to correct the interference at his own expense.

ADAM-4561 User Manual

iv

Image 4
Contents 1-Port Isolated USB to RS-232/422/485 Converter User ManualADAM-4561 Copyright AcknowledgementsEdition Printed in TaiwanProduct Warranty 2 years Declaration of Conformity CE FCC Class AFCC Class B Technical Support and AssistanceSafety Instructions 20 C -4 F OR ABOVE 60 C 140 F. THIS COULD DAM viii Contents Installation & SetupChapter OverviewPage Overview CHAPTERChapter 1 Overview 1.1 Introduction1.2 Features 1.3 Specifications 1.4 Package ChecklistTransmission speed 75 bps to 115.2 Kbps Data bit 5, 6, 7 Stop bit 1, 1.5Installation & Setup Chapter 2 Installation & Setup 2.1 Hardware Installation2.1.1 Network Architecture Figure 2.1 Network ArchitectureWiring for RS-232 Connection Figure 2.2 Wiring of RS-232 Connection2.1.2 Network Connection 2.1.3 Serial ConnectionWiring of RS-485 Connection Figure 2.3 Wiring of RS-485 ConnectionWiring of RS-422 Connection Figure 2.4 Wiring of RS-422 Connection2.1.4 Jumper Settings 2.2 Software Installation 2.2.1 Driver and Utility InstallationChapter2 After the installation is complete, you will see the dialog window shown by figure below appearing. Click the “Finish” button to complete the installation
Related manuals
Manual 22 pages 3.8 Kb