Advantech ADAM-4561 user manual Product Warranty 2 years

Page 3

Product Warranty (2 years)

Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal- lation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test- ing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.

2.Call your dealer and describe the problem. Please have your man- ual, product, and any helpful information readily available.

3.If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly.

4.Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for war- ranty service.

5.Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

iii

Image 3
Contents User Manual 1-Port Isolated USB to RS-232/422/485 ConverterADAM-4561 Printed in Taiwan CopyrightAcknowledgements EditionProduct Warranty 2 years FCC Class A Declaration of Conformity CETechnical Support and Assistance FCC Class BSafety Instructions 20 C -4 F OR ABOVE 60 C 140 F. THIS COULD DAM viii Overview ContentsInstallation & Setup ChapterPage CHAPTER Overview1.1 Introduction Chapter 1 Overview1.2 Features Data bit 5, 6, 7 Stop bit 1, 1.5 1.3 Specifications1.4 Package Checklist Transmission speed 75 bps to 115.2 KbpsInstallation & Setup Figure 2.1 Network Architecture Chapter 2 Installation & Setup2.1 Hardware Installation 2.1.1 Network Architecture2.1.3 Serial Connection Wiring for RS-232 ConnectionFigure 2.2 Wiring of RS-232 Connection 2.1.2 Network ConnectionFigure 2.4 Wiring of RS-422 Connection Wiring of RS-485 ConnectionFigure 2.3 Wiring of RS-485 Connection Wiring of RS-422 Connection2.1.4 Jumper Settings 2.2.1 Driver and Utility Installation 2.2 Software InstallationChapter2 After the installation is complete, you will see the dialog window shown by figure below appearing. Click the “Finish” button to complete the installation
Related manuals
Manual 22 pages 3.8 Kb