Advantech PCM-9588 user manual 7 PnP/PCI Configurations, Init Display First PCI Slot

This item allows user to enable and key in Date/time to power on system

Disabled	Disable this function.
Enabled	Enable alarm function to power on system
Data (of month) Alarm	1-31
Time (HH:MM:SS) Alarm	(0-23) : (0-59) : 0-59)

3.2.7PnP/PCI Configurations

Note! This "PnP/PCI Configurations" option sets up the IRQ and DMA (both PnP and PCI bus assignments).

!Init Display First [PCI Slot]

This item is setting for start up Video output from PCI or Onboard device.

!Reset Configuration Data [Disabled]

This item allow user to clear any PnP configuration data stored in the BIOS.

!Resources Controlled By [Auto (ESCD)]

–IRQ Resources

This item allows you respectively assign an interruptive type for IRQ-3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.

–DMA Resources

This item allows you respectively assign an interruptive type for DMA, 0, 1, 2, 3, 4, 5, 6, and 7.

!PCI VGA Palette Snoop [Disabled]

The item is designed to solve problems caused by some non-standard VGA cards. A built-in VGA system does not need this function.

PCM-9588 User Manual 30