Advantech AIMB-210 user manual Jumpers and Connectors, Industrial features

1.3.6Industrial features

!Watchdog timer: Can generate a system reset. The watchdog timer is pro- grammable, with each unit equal to one second or one minute (255 levels)

!TPM1.2(optional): Infineon TPM chip SLB9635 TT 1.2 Module Onboard

1.3.7Mechanical and environmental specifications

!Operating temperature: 0 ~ 60° C (32 ~ 140° F, Depending on CPU)

!Storage temperature: -20 ~ 70° C (-4 ~ 158° F)

!Humidity: 5 ~ 95% non-condensing

!Power supply voltage: +3.3 V, +5 V, +12 V, -12 V, 5 Vsb

!Power consumption:

+5 V @ 1.96 A, +3.3 V @ 1.21 A, +12 V @ 0.19 A, 5 VSB @ 0.28, -12 V@ 0.06 A. Measure the maximum current value which system under maximum load (CPU: Top speed, RAM & Graphic: Full loading)

!Board size: 170 mm x 170 mm (6.69" x 6.69")

!Board weight: 0.365 kg

1.4Jumpers and Connectors

Connectors on the AIMB-210 motherboard link it to external devices such as hard disk drives and a keyboard. In addition, the board has a number of jumpers used to configure your system for your application.

The tables below list the function of each of the board jumpers and connectors. Later sections in this chapter give instructions on setting jumpers. Chapter 2 gives instruc- tions for connecting external devices to your motherboard.

Table 1.1: Jumpers

Label	Function
CMOS1	CMOS clear
JPSON1	AT/ATX mode selector
JSETCOM2	Serial port: RS232/RS422/RS485

Table 1.2: Connectors

Label	Functions
JFP1	Power Switch / Reset connector
JFP2	External speaker / SATA HDD LED connector / SM Bus connector
	Power LED
JFP3(Keyboard Lock	Suspend: Fast flash (ATX/ AT)
	System On: ON (ATX/ AT)
and Power LED)
	System Off: OFF (AT)
	System Off: Slow flash (ATX)
CMOS1	CMOS clear (Default 1-2)
JSETCOM2	COM2 RS232/422/485 Jumper Setting
JLV1	LVDS1 LCD power 3.3V/5V selection Default (1-2, 3.3V)
JLV2	LVDS2 LCD power 3.3V/5V selection Default (1-2, 3.3V)
JPSON1	AT(1-2) / ATX(2-3) (Default 2-3)
LPT1	parallel connector

AIMB-210 User Manual 4