Advantech MIC-3043 user manual Product Warranty 1 year

Page 3

Product Warranty (1 year)

Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for one year from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper instal- lation. Advantech assumes no liability under the terms of this warranty as a consequence of such events.

Because of Advantech’s high quality-control standards and rigorous test- ing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details.

If you think you have a defective product, follow these steps:

1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs.

2.Call your dealer and describe the problem. Please have your man- ual, product, and any helpful information readily available.

3.If your product is diagnosed as defective, obtain an RMA (return merchandise authorization) number from your dealer. This allows us to process your return more quickly.

4.Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for war- ranty service.

5.Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer.

iii

Image 3
Contents MIC-3043 Copyright Acknowledgements Product Warranty 1 year FCC Class a CCC Class a Declaration of ConformityTechnical Support and Assistance Document FeedbackPacking List Safety Instructions Wichtige Sicherheishinweise ING to the Manufacturers InstructionsSafety Precaution Static Electricity Contents Appendix B Ordering Information Hardware Configuration Introduction Features SpecificationsGeneral Input Power SupplyDimensions and Weight Hot-swap FansMIC-3043 functional block diagram Dimensions and AppearancePage Installation MIC-3043 Illustration Initial InspectionInstallation Procedures Card Installation and RemovalTo install a card Installing a card into the chassis Installing a 3.5 Hard Disk Drive Before Operating the SystemTo remove a card Scsi adaptor Connecting the rear I/O moduleHDD number for type B 5IDE adaptor type B Replacing the Hot-swap Fan Hot-swappable fan maintenancePage Backplane General Information SpecificationSlot Assignments System to peripheral slot signal assignment Backplane connector and jumper description Connector and Jumper LocationsConnector and jumper locations on the rear side. MIC-3811 1 AC/DC Power Connector CN3, CN17 Power Switch3 V I/O Voltage Selection Clock Routing Configuration Fan Module ConnectorAlert indicators Pin Assignments Table A.1 MIC-3812 and MIC-3811 system slot P1 connector MIC-3812 and MIC-3811 System Slot P1 ConnectorTable A.2 MIC-3812 and MIC-3811 System Slot P2 Connector MIC-3812 and MIC-3811 System Slot P2 ConnectorTable A.3 MIC-3812 and MIC-3811 System Slot P3 Connector MIC-3812 and MIC-3811 System Slots P3 ConnectorTable A.4 MIC-3812 and MIC-3811 System Slot P4 Connector MIC-3812 and MIC-3811 System Slots P4 ConnectorTable A.5 MIC-3812 and MIC-3811 System Slot P5 Connector MIC-3812 and MIC-3811 System Slots P5 ConnectorTable A.6 MIC-3812 and MIC-3811 Peripheral Slot P1 Connector MIC-3812 and MIC-3811 Peripheral Slot P1 ConnectorTable A.7 MIC-3812 and MIC-3811 System Slot P2 Connector MIC-3812 and MIC-3811 Peripheral Slot P2 ConnectorMIC-3812 and MIC-3811 Peripheral Slot P3 Connector Table A.9 MIC-3812 Peripheral System Slot P4 Connector MIC-3812 Peripheral Slot P4 ConnectorTable A.10 MIC-3811 Peripheral System Slot P4 Connector MIC-3811 Peripheral Slot P4 ConnectorTable A.11 MIC-3811 Peripheral Slot P5 Connector MIC-3811 Peripheral Slot P5 ConnectorTable A.12 MIC-3812 Peripheral Slot P5 Connector MIC-3812 Peripheral Slot P5 ConnectorTable A.14 LED Board Connector Fan Module ConnectorsLED Board Connector Table A.13 Fan Module ConnectorsPin Signal MIC-3812 & MIC-3812 Alarm Board Interface ConnectorTable A.16 cPCI Power Connector CN1,CN2, and CN5 CPCI Power Connector CN1,CN2, and CN5Table A.17 AC/DC Power Connector CN3 17 AC/DC Power Connector CN3Table A.19 Enable Power Switch Connector CN15 18 AC/DC Power Connector CN17Enable Power Switch Connector CN15 Table A.18 AC/DC Power Connector CN17Table A.20 Device Power Connector CN18 Device Power Connector CN18Page Ordering Information Appendix B Ordering Information Default Alarm Module Upgradeable Alarm ModuleTable B.1 Recommended 6U CompactPCI SBC

MIC-3043 specifications

The Advantech MIC-3043 is a cutting-edge embedded computing platform designed for industrial and IoT applications. Hailing from a renowned manufacturer known for its commitment to quality and innovation, the MIC-3043 offers a robust solution tailored for today's demanding environments.

One of the standout features of the MIC-3043 is its compact form factor, enabling seamless integration into various systems without compromising on performance. Despite its small size, it boasts powerful processing capabilities, housing Intel Celeron or Core processors that ensure efficient execution of complex applications. This feature makes it particularly suitable for applications like machine vision, automation, and data acquisition.

The MIC-3043 is engineered with flexible I/O options that cater to diverse industry needs. It supports multiple serial, USB, and Ethernet interfaces, allowing for broad connectivity and easy integration with existing systems. This versatility enables the MIC-3043 to communicate effortlessly with numerous devices, enhancing its usability across different industrial sectors.

In addition to its versatile I/O capabilities, the MIC-3043 prioritizes expandability. It offers mini-PCIe slots that facilitate additional functions through modular expansions, such as wireless communication or additional storage options. This characteristic not only enhances the MIC-3043’s functionality but also positions it as a scalable solution that can evolve with changing technological demands.

The MIC-3043 integrates advanced remote management features, allowing users to monitor system performance and health in real-time. This capability is crucial for reducing downtime and maintenance costs in industrial settings. Coupled with the device's support for various software environments, including Windows and Linux, it provides developers with the flexibility to implement tailored solutions.

Durability is another hallmark of the Advantech MIC-3043. Designed to operate in harsh environments, it complies with industrial standards for temperature and vibration resistance. This resilience ensures reliable operation even in challenging conditions, making it an ideal choice for factory automation, transportation, and energy sectors.

Overall, the Advantech MIC-3043 represents a synthesis of power, flexibility, and durability. Its robust features, combined with a compact design and extensive connectivity options, empower industries to harness the potential of edge computing and IoT, contributing to more efficient and intelligent operations.