Advantech PPC-175T user manual Preparing for First-time Use, Installation Procedures

Page 24

2.2Preparing for First-time Use

Before commencing set up of the panel PC system, the following items should be available:

!Keyboard

!Mouse (for system software installation)

2.3Installation Procedures

2.3.1Connecting the power cord

The panel PC can only be powered through an AC electrical outlet (100 ~ 250 volts, 50 ~ 60 Hz). Be sure to handle the power cords by holding the plug ends only.

Follow these procedures in order:

1.Connect the female end of the power cord to the AC inlet of the panel PC.

2.Connect the 3-pin male plug of the power cord to an electrical outlet.

2.3.2Connecting the keyboard and mouse

Connect the PS/2 mouse and keyboard to the I/O section of PPC.

If using a serial mouse and the panel PC has a touchscreen, it is possible to connect the mouse to any COM port except COM4.

2.3.3Switching on the power

Switch on the power switch, which is located inside the bottom side cover.

2.4Running the BIOS Setup Program

The panel PC will be properly set up and configured by the dealer prior to delivery. However, it may be necessary to use the panel PC's BIOS (Basic Input-Output Sys- tem) setup program to change the system configuration information, such as the cur- rent date and time, or the type of hard drive. The setup program is stored in read-only memory (ROM). It can be accessed either when you turn on or reset the panel PC, by pressing the “Del” key on your keyboard immediately after powering on the computer.

The settings specified with the setup program are recorded in a special area of mem- ory called “CMOS RAM.” This memory is backed up by a battery so that it will not be erased after turning off or resetting the system. Whenever the power is turned on, the system reads the settings stored in CMOS RAM and compares them to the equip- ment check conducted during the power on self-test (POST). If a problem occurs, an error message will be displayed on screen, and the computer prompts the user to run the setup program.

PPC-175T User Manual

10

Page 23 Page 25
Image 24
Page 23 Page 25
Contents PPC-175T Copyright Acknowledgements Product Warranty 2 years Declaration of ConformityTechnical Support and Assistance FCC Class BDocument Feedback Packing ListAdditional Information and Assistance Contact informationSafety Instructions Wichtige Sicherheishinweise Safety Precaution Static Electricity Page Contents Jumpers & Connectors Appendix aFigure A.18 Disconnecting the CD-ROM connector Appendix BPage Chapter General InformationSpecifications General InformationIntroduction General Information Certifications Dimensions Dimensions of PPC-175TPage System Setup System Setup Quick Tour of the Panel PCSystem Installation Procedures Running the Bios Setup ProgramPreparing for First-time Use Installing System Software Installing the DriversPage Using the Panel PC PcmciaUsing the Panel PC CD-ROM Drive optionalPcmcia PS/2 Mouse and KeyboardPCI Bus Expansion PCI bus expansionSerial COM Ports VGA PortUSB Ports Audio Interface EthernetFront Bezel LED and Light Sensor Touchscreen Optional Page Hardware Installation Hardware Installation Jumpers and ConnectorsDisassembling the Panel PC Hardware Installation Installing the 2.5 Hard Disk Drive PPC without the Rear CoverPlugging in the Eide cable Installing the Central Processing Unit CPU Placing the CPU in the socketTightening the screws on the CPU 11 Fastening the CPU module to the motherboard Installing the DDR Sdram Memory Module 12 Placing the memory module in the DimmPage Jumpers Connectors Jumpers & Connectors Setting jumpersJumpers & Connectors Jumper and Connector Locations Connectors Page Driver Installation Driver Installation Driver InstallationUpdating Driver Searching on the Advantech Website Pin Assignments Pin Assignments MAN-Heading01 style Arial, Bold, 18pt, MAN-H1 colorDisassembly Appendix a Disassembly Disassembly ProcedureAppendix a Disassembly Figure A.4 The PPC without the rear cover Figure A.6 Unfastening the middle plate Figure A.8 Unfastening the HDD module Figure A.10 Disconnecting the HDD cable Figure A.12 Loosening the screws on the CD-ROM module Figure A.14 Removing the fixed brace Figure A.16 Removing the CD-ROM / Pcmcia slot cover Figure A.18 Disconnecting the CD-ROM connector Figure A.20 Unfastening the CPU socket Figure A.22 Removing the Sdram module Page Appendix B PCI Card Size LimitsFigure B.1 PCI Card Dimensional Limits Appendix B PCI Card Size Limits

PPC-175T specifications

The Advantech PPC-175T is a powerful and versatile panel PC designed to meet the demands of industrial environments. It combines a rugged design with advanced computing capabilities, making it an ideal solution for various applications such as factory automation, transportation, smart buildings, and system control.

One of the standout features of the PPC-175T is its 17-inch touch screen display. The display boasts an LED-backlit panel that delivers crisp and vibrant visuals, crucial for monitoring and controlling industrial processes. The projected capacitive touchscreen technology allows for multi-touch operation, enhancing user interaction and making it easier for operators to navigate through complex interfaces.

Performance-wise, the PPC-175T is powered by Intel's latest processors, which ensure smooth and efficient operation. Depending on the configuration, users can choose from various CPU options, allowing for flexibility based on processing requirements. The system supports up to 8 GB of RAM, which is essential for running multiple applications simultaneously, ensuring that users can efficiently manage tasks without lagging.

In terms of connectivity, the PPC-175T comes equipped with multiple I/O options, including USB, Ethernet, and COM ports, enabling easy integration into existing systems. The dual LAN ports provide redundancy and enhance network reliability, which is crucial for mission-critical applications. Furthermore, the panel PC supports a wide range of communication protocols, making it adaptable to different industrial systems.

The rugged construction of the PPC-175T is another significant characteristic. It features an IP65-rated front panel, ensuring protection against dust and water, which is vital for operation in harsh environments. The fanless design further enhances its durability by minimizing moving parts, reducing maintenance requirements, and extending the lifespan of the device.

Additionally, the PPC-175T is designed with energy efficiency in mind. Its low power consumption makes it an environmentally friendly option while also reducing operating costs. The ability to mount the device in various configurations, such as panel, wall, or VESA mount, adds to its versatility, allowing it to fit seamlessly into different operational settings.

Overall, the Advantech PPC-175T stands out as a reliable and feature-rich panel PC, making it an excellent choice for industries looking to enhance their operational efficiency and productivity. Its combination of robust performance, durable design, and extensive connectivity options positions it as a leader in the industrial computing space.
Top Page Image Contents