Advantech PPC-175T user manual Safety Instructions

Page 7

Safety Instructions

1.Read these safety instructions carefully.

2.Keep this User Manual for later reference.

3.Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning.

4.For plug-in equipment, the power outlet socket must be located near the equip- ment and must be easily accessible.

5.Keep this equipment away from humidity.

6.Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage.

7.The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS.

8.Make sure the voltage of the power source is correct before connecting the equipment to the power outlet.

9.Position the power cord so that people cannot step on it. Do not place anything over the power cord.

10.All cautions and warnings on the equipment should be noted.

11.If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage.

12.Never pour any liquid into an opening. This may cause fire or electrical shock.

13.Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel.

14.If one of the following situations arises, get the equipment checked by service personnel:

15.The power cord or plug is damaged.

16.Liquid has penetrated into the equipment.

17.The equipment has been exposed to moisture.

18.The equipment does not work well, or you cannot get it to work according to the user's manual.

19.The equipment has been dropped and damaged.

20.The equipment has obvious signs of breakage.

21.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT.

22.CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

23.The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A).

DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein.

vii

PPC-175T User Manual

Page 6 Page 8
Image 7
Page 6 Page 8
Contents PPC-175T Copyright Acknowledgements Declaration of Conformity Product Warranty 2 yearsFCC Class B Technical Support and AssistancePacking List Document FeedbackContact information Additional Information and AssistanceSafety Instructions Wichtige Sicherheishinweise Safety Precaution Static Electricity Page Contents Appendix a Jumpers & ConnectorsAppendix B Figure A.18 Disconnecting the CD-ROM connectorPage General Information ChapterGeneral Information SpecificationsIntroduction General Information Certifications Dimensions of PPC-175T DimensionsPage System Setup Quick Tour of the Panel PC System SetupSystem Running the Bios Setup Program Installation ProceduresPreparing for First-time Use Installing the Drivers Installing System SoftwarePage Pcmcia Using the Panel PCCD-ROM Drive optional Using the Panel PCPS/2 Mouse and Keyboard PcmciaPCI bus expansion PCI Bus ExpansionVGA Port Serial COM PortsUSB Ports Ethernet Audio InterfaceFront Bezel LED and Light Sensor Touchscreen Optional Page Hardware Installation Jumpers and Connectors Hardware InstallationDisassembling the Panel PC Hardware Installation PPC without the Rear Cover Installing the 2.5 Hard Disk DrivePlugging in the Eide cable Placing the CPU in the socket Installing the Central Processing Unit CPUTightening the screws on the CPU 11 Fastening the CPU module to the motherboard 12 Placing the memory module in the Dimm Installing the DDR Sdram Memory ModulePage Jumpers Connectors Setting jumpers Jumpers & ConnectorsJumpers & Connectors Jumper and Connector Locations Connectors Page Driver Installation Driver Installation Driver InstallationUpdating Driver Searching on the Advantech Website Pin Assignments MAN-Heading01 style Arial, Bold, 18pt, MAN-H1 color Pin AssignmentsDisassembly Disassembly Procedure Appendix a DisassemblyAppendix a Disassembly Figure A.4 The PPC without the rear cover Figure A.6 Unfastening the middle plate Figure A.8 Unfastening the HDD module Figure A.10 Disconnecting the HDD cable Figure A.12 Loosening the screws on the CD-ROM module Figure A.14 Removing the fixed brace Figure A.16 Removing the CD-ROM / Pcmcia slot cover Figure A.18 Disconnecting the CD-ROM connector Figure A.20 Unfastening the CPU socket Figure A.22 Removing the Sdram module Page PCI Card Size Limits Appendix BAppendix B PCI Card Size Limits Figure B.1 PCI Card Dimensional Limits

PPC-175T specifications

The Advantech PPC-175T is a powerful and versatile panel PC designed to meet the demands of industrial environments. It combines a rugged design with advanced computing capabilities, making it an ideal solution for various applications such as factory automation, transportation, smart buildings, and system control.

One of the standout features of the PPC-175T is its 17-inch touch screen display. The display boasts an LED-backlit panel that delivers crisp and vibrant visuals, crucial for monitoring and controlling industrial processes. The projected capacitive touchscreen technology allows for multi-touch operation, enhancing user interaction and making it easier for operators to navigate through complex interfaces.

Performance-wise, the PPC-175T is powered by Intel's latest processors, which ensure smooth and efficient operation. Depending on the configuration, users can choose from various CPU options, allowing for flexibility based on processing requirements. The system supports up to 8 GB of RAM, which is essential for running multiple applications simultaneously, ensuring that users can efficiently manage tasks without lagging.

In terms of connectivity, the PPC-175T comes equipped with multiple I/O options, including USB, Ethernet, and COM ports, enabling easy integration into existing systems. The dual LAN ports provide redundancy and enhance network reliability, which is crucial for mission-critical applications. Furthermore, the panel PC supports a wide range of communication protocols, making it adaptable to different industrial systems.

The rugged construction of the PPC-175T is another significant characteristic. It features an IP65-rated front panel, ensuring protection against dust and water, which is vital for operation in harsh environments. The fanless design further enhances its durability by minimizing moving parts, reducing maintenance requirements, and extending the lifespan of the device.

Additionally, the PPC-175T is designed with energy efficiency in mind. Its low power consumption makes it an environmentally friendly option while also reducing operating costs. The ability to mount the device in various configurations, such as panel, wall, or VESA mount, adds to its versatility, allowing it to fit seamlessly into different operational settings.

Overall, the Advantech PPC-175T stands out as a reliable and feature-rich panel PC, making it an excellent choice for industries looking to enhance their operational efficiency and productivity. Its combination of robust performance, durable design, and extensive connectivity options positions it as a leader in the industrial computing space.
Top Page Image Contents