Advantech user manual Passive backplane options for SPC-530BP / SPC-530BP-U2C

•Paint color: Front panel: Pantone Black 4C 2X; Chassis: Brushed finish, Ni

•Operating temperature: 0 to 50o C (32 to 122o F)

•Relative humidity: 20 to 90%

•CE compliant

Hot-swap AC-DC 400-watt ATX redundant power supply (RPS-400ATX)

•Output rating: 400 watts (max.)

•Input voltage: 90 to 132 VAC or 180 to 264 VAC @ 47 ~ 63 Hz, switchable

•Output voltages: +5 V @ 42 A, +3.3 V @ 20 A, +12 V @ 14 A, -5 V @ 1 A, -12 V @ 1 A +5 Vsb @ 0.75 A (+5 V / +3.3 V; Total: 210 watts)

•Minimum load: +5 V @ 2 A, +3.3 V @ 0.3 A, +12 V @ 0.5 A

•MTBF: 100,000 hours at 25o C, 70% load

•Safety: UL/C-UL/TUV/CE approved

Passive backplane options (for SPC-530BP / SPC-530BP-U2C)

Backplane Model Name	Slots per Segment	Segment(s)
PCA-6120P4	15 ISA / 4 PCI / 1 PICMG	Single
PCA-6119P7	11 ISA / 7 PCI / 1 PICMG	Single
PCA-6119P17	1 ISA / 17 PCI / 1 PICMG	Single

RAID card features (only for SPC-530BP-U2C / SPC-530MB-U2C)

The SPC-530 is available with a RAID to PCI host interface. This gives users numerous extra features. (For more details, please refer to our RAID manual, under SPC-530BP-U2C / SPC-530MB-U2C)

•One/Two Ultra2 Wide SCSI (68-pin) channel(s) on-board

•Automatic bad sector reassignment, Bad Sector Management

•Built-in SCSI terminator

•RAID 0, 1 (0+1), 3, 5

•Auto-rebuilding

•Hot-spare drive operation

•Disk hot-swapping

•Self-diagnostics

•Complete OS support: MS-DOS, Windows 95/98, Windows NT, NetWare, OS/2, SCO UnixWare, Sun Solaris and Linux

2 SPC-530 User's Manual