Black & Decker 90527136, WS100AB Power System, Controls and Functions, Introduction, Features

Page 3

WS100AB_ManualEN_SP_121107.qxp 12/11/2007 3:35 PM Page 4

Although this unit contains a non-spillable battery, it is recommended that unit be kept upright during storage, use and recharging. To avoid possible damage that may shorten the unit’s working life, protect it from direct sunlight, direct heat and/or moisture.

Check unit periodically for wear and tear. Take to a qualified technician for replacement of worn or defective parts immediately.

WARNING: Batteries can explode, or leak, and can cause injury or fire. To reduce this risk:

Carefully follow all instructions and warnings on the battery label and package.

Always insert batteries correctly with regard to polarity (+ and –), marked on the battery and the equipment.

Do not short battery terminals.

Do not mix old and new batteries. Replace all of them at the same time with new batteries of the same brand and type.

Immediately remove batteries that will not hold a charge and dispose of per local codes.

Do not dispose of batteries in fire.

Keep batteries out of reach of children.

“Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e. packed in suitcases and carryon luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.”

CAUTION: TO REDUCE THE RISK OF DAMAGE TO THE UNIT:

Although this unit contains a non-spillable battery, it is recommended that unit be kept upright during storage, use and recharging. To avoid possible damage that may shorten the unit’s working life, protect it from direct sunlight, direct heat and/or moisture.

Read And Understand This Instruction Manual Before Using This Unit.

SAVE THESE INSTRUCTIONS

Power System

This unit has a unique power system. Its primary power source is the standard “C” dry cell battery.

This unit also comes with a built-in Ni-MH Rechargeable Backup Battery, that serves as “auxiliary” power for the AM/FM Weather Alert Radio and LED Emergency Light should no other power source be available. This auxiliary power system may be recharged using the Fold-Away Hand Crank.

Note: Backup battery power will only operate the Radio and LED Emergency Light. IT CANNOT POWER THE LANTERN.

Controls and Functions

9 8

7 6 5

1

2

3 4

10

18

11

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

12

17

16

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

13

15

14

INTRODUCTION

Thank you for choosing the Black & Decker® Sport Lantern/Radio, Model WS100AB. Please read this guide carefully before use to ensure optimum performance and avoid damage to the unit.

FEATURES

• AM/FM Weather Alert Radio with automatic hazard alert

• Powerful quartz halogen Lantern

Long-lasting 3-LED Emergency Light

• Cell Phone Charging Port* and charging tips (included)

Built-in Earphone Jack (earphone not included)

1.Quartz Halogen Lantern

2.Volume Control Dial

3.Radio Frequency Indicator

4.Radio Tuning Knob

5.Alarm Lock Pushbutton

6.OFF/AM/FM/Weather Band Selector

7.Alert ON/OFF Pushbutton

8.Rubber Grip Carry Handle

9.Lantern ON/OFF Locking Trigger Switch

10.LED Emergency Light ON/OFF Pushbutton

11.3 LED Emergency Light

12.Charging LED

13.Power Selector Switch

14.Cell Phone Charging Port

15.Earphone Jack

16.Fold-Away Hand-Crank to recharge backup battery

17.Mono speaker

18.Telecscoping Antenna

Built-in Telescoping Antenna for enhanced reception

• Battery powered using nine (9) standard “C” dry cell batteries

Built-in Rechargeable Backup Battery for auxiliary power with Fold-Away Hand-Crank for recharging

• Rubber Grip Carry Handle

*May not work with all cell phones.

POWERING THE UNIT

The unit can be powered in one of two ways:

1.With nine (9) standard dry cell “C” batteries (not included).

2.Using the internal backup Ni-MH battery.

The backup battery allows the Radio and Emergency Light to operate when the “C” batteries are expended and replacements are not available. The rechargeable backup battery is not user-accessible.

4

5

Image 3
Contents Especificaciones AccesoriosInformación del servicio técnico Garantía Completa DE DOS Años Para USO EN EL HogarGeneral Safety Warnings and Instructions for ALL Appliances Read ALL InstructionsTuner has drifted off the weather channel station Controls and Functions Power SystemFeatures Powering the UnitNoaa Weather Radio NWR All Hazards Using Dry Cell Battery PowerUsing Internal Backup Battery Power Internal Backup Battery ReplacementSpecifications AccessoriesService Information Full TWO-YEAR Home USE WarrantyLEA Todas LAS Instrucciones Normas DE SEGURIDAD/DEFINICIONESInstrucciones DE Seguridad DE LA Radio Meteorológica Instrucciones Importantes Sobre SeguridadConserve Estas Instrucciones Sistema de energíaControles y funciones Uso de las baterías secas Uso de la batería interna de respaldoReemplazo de la batería interna de respaldo

90527136, WS100AB specifications

The Black & Decker 90527136, WS100AB, is an innovative and versatile tool designed to meet the demands of both professional and DIY users. This powerful tool combines functionality with ease of use, making it a popular choice among homeowners, contractors, and hobbyists alike.

One of the standout features of the WS100AB is its lightweight design, which allows users to operate the tool for extended periods without causing fatigue. The ergonomic grip enhances comfort during use, ensuring that tasks can be completed efficiently and with precision. The tool’s compact size makes it easy to store, and its portability ensures that it can be easily transported to various job sites.

The WS100AB incorporates advanced technology that enhances its performance. A high-torque motor provides powerful operation, making it suitable for a wide range of applications, from sanding to grinding and polishing. The motor is designed for durability, ensuring that it can withstand demanding tasks while delivering consistent results.

One of the key characteristics of the WS100AB is its versatility. The tool comes with interchangeable attachments, enabling users to switch between different applications quickly. Whether it’s sanding down surfaces, smoothing out edges, or polishing materials, this tool can handle it all. The easy-to-change attachments also allow for greater efficiency, minimizing downtime during projects.

Furthermore, the Black & Decker 90527136 includes various speed settings, allowing users to adjust the tool's performance to suit specific needs. This is particularly beneficial when working with different materials that require varying intensity levels for optimal results.

Safety features are also a priority with the WS100AB. Integrated safety guards protect users from moving parts and debris, ensuring a safer working environment. Additionally, the tool is designed with a cooling system that prevents overheating, prolonging its lifespan and enhancing reliability.

In summary, the Black & Decker 90527136, WS100AB, is a robust and versatile tool designed for various applications. With its lightweight design, powerful motor, multiple speed settings, and replaceable attachments, it stands out as a top choice for users seeking reliability, performance, and efficiency. Whether for professional projects or home improvement tasks, this tool delivers consistent results, making it an essential addition to any toolkit. Its combination of technology and user-friendly design sets it apart in the competitive market of power tools.