Alarms and sleep, Settings Scan settings

6.2 Now playing information

While the stream is playing, the screen shows its frequency, or if RDS information is available, station name and any further RDS information such as programme name, track title and contact details. To view further information about the broadcast, press INFO button.

Each time you press INFO button, another set of information is displayed, cycling through further RDS information, frequency and today’ s date.

6.3Settings Scan settings

By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio (hiss) from weak stations. To change the scan settings to stop only at stations with good signal strength, select MENU >

SCAN SETTING > STRONG STATIONS ONLY? > YES.

Audio settings

By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-to- noise ration (hiss). To play weak stations in mono, select MENU > AUDIO SETTING > FM WEAK RECEPTION: LISTEN IN MONO ONLY > YES.

7 Alarms and sleep

As well as a clock/calendar, there are two versatile wake-up alarms with snooze facility, and a sleep function to turn the system off after a set period.

7.1 Alarms

To set or change an alarm, either press ALARM button or select

MENU > MAIN MENU > ALARMS.

Select the alarm number (1 or 2) then configure the following parameters:

OENABLE: ON/OFF,

OTIME,

OMODE: BUZZER, INTERNET RADIO, DAB OR FM,

OPRESET: 1-10,

OFREQUENCY: DAILY, ONCE, WEEKENDS OR WEEKDAYS,

OVOLUME:0 – 20.

When you have set the alarm, select Save to activate. The screen shows active alarms with an icon at the bottom left.