16
(SNOOZE): When alarm is sounding, snooze for a set time.
17INFO: Press to view more information about the station or track playing. Press again to cycle through further information screens then return to the normal Now playing screen.
18
STANDBY: Turn on or back to standby mode (showing clock and date). Cancels sleep function.
19ALARM: Press to enter alarm setting menu.
Install the remote control battery
1.Remove the battery cover.
2.Insert the battery of the type CR 2025 into the battery compartment. Make sure that the + symbol faces upwards.
3.Replace the cover.
WARNING:
•Leaking out battery acid can damage your health. Remove the battery from the battery compartment as soon as it is exhausted or if the remote control is not going to be used for a longer period of time. Wipe up leaked out battery acid with a cloth. In case of skin contact immediately wash the affected area. Seek medical advice if battery acid has been swallowed. In case of contact with your eyes wash out the eyes and seek medical advice.
•Do not expose the battery to high temperatures or direct sunlight. Never throw batteries into the fire. There is a danger of explosion!
•Never try to recharge batteries,
•Avoid contact with metallic objects (Rings, nails, screws et cetera). There is a danger of
CAUTION:
•Batteries are not to be disposed of together with domestic wastes. Dispose of the used batteries at the relevant collection bin or at your dealer’ s.
•Improper installation of batteries can cause leaking out and corrosion and leaving the remote irreparable damaged.
NOTE:
•If the remote control is not going to be used for an extended period of time, remove the battery.
•Exhausted batteries should be replaced immediately to prevent corrosion damage.
•If the range of the remote control is reduced replace the cell by a battery of the same type (CR 2025).
Usage of the remote control
•Align the remote control directly at the remote control sensor of the device.
•The range of the remote control depends on the brightness of the room and the charge of the battery.
•Bright light (Sun or artificial light) should not fall directly at the remote control sensor. Bright light can negative influence the efficacy of the remote control.
•Make sure that they be no obstacles between the remote control and the remote control sensor.
8