Installation Instructions

This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at1-800-645-4994.

UNIVERSAL INSTALLATION PROCEDURE USING MOUNTING SLEEVE

1.Remove the fold-down detachable front panel if it is attached to the chassis by pushing the fold-down button; then press the “Release” button and slide the panel off the front mounting plate. Now slide the mounting sleeve off of the chassis. If it islocked into position, use the removal tools (supplied) to disengage it.

2.Check the dashboard opening size by sliding the mounting sleeve into it. If the opening is not large enough, carefully cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the opening or cause it to bend or bow. Check that there will be sufficient space behind the dashboard for the radio chassis.

3.Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is firmly secured to the dashboard.

4.Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve. Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”). If unit does not operate, re-check all wiring until problemsi corrected. Once proper operation is achieved, turn off the ignition switch and proceed with final mounting of the chassis.

5.Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the spring clips lock it into place.

6.Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.

CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from the weight of the radio or improper operation due to vibration.

7.Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for the unit.

INSTALLATION USING KITS

1.If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with the installation kit to attach the radio to the mounting plate supplied with the kit.

2.Wire and test the radio as described in Step 4 of the installation procedure.

3.Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.

4.Attach the support strap to the radio and dashboard as described in Step 6 above.

5.Replace the dashboard trim panel.

ISO INSTALLATION PROCEDURE

This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please consult with your local car stereo specialist shop for assistance on this type of installation.

1.Remove the existing factory radio from its dashboard or center console mounting. Save all hardware and brackets as they will be used to mount the new radio.

2.Carefully unsnap the plastic frame from the front of the new radio chassis. Remove and discard the frame.

3.Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.

CAUTION: DO NOT EXCEED M5 X 8 MM MAXIMUM SCREW SIZE.

LONGER SCREWS MAY TOUCH AND DAMAGE COMPONENTS INSIDE THE CHASSIS.

4.Wire the new radio to the vehicle as per step 4 of the Universal Installation Procedure.

5.Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

-2-

P-963ESP specifications

The Audiovox P-963ESP is a compact yet feature-rich portable DVD player designed to elevate your on-the-go entertainment experience. This player seamlessly blends advanced technology with user-friendly features, making it an excellent choice for families, travelers, and anyone who appreciates high-quality audio and visual performance.

One of the standout characteristics of the Audiovox P-963ESP is its impressive 9-inch widescreen display. This vibrant screen offers a resolution that ensures sharp, clear images and is large enough to provide an enjoyable viewing experience without being cumbersome. The screen can swivel and tilt, allowing users to find the perfect angle for optimal viewing comfort, whether they are sitting in a car, on a plane, or relaxing on the couch at home.

Audio performance is another area where the P-963ESP excels. It comes equipped with built-in stereo speakers that deliver clear and robust sound, minimizing distortion and enhancing the listening experience. For those who prefer a more immersive audio setup, the player also includes a headphone jack, allowing users to connect their favorite headphones for private listening.

The P-963ESP supports a variety of disc formats, including DVD, CD, and CD-R/RW, making it a versatile option for playing different types of media. It also features a USB port and an SD card slot, enabling users to play digital media files directly from flash drives or memory cards. This feature expands the range of content available, allowing for playback of videos, music, and images.

In addition to its playback capabilities, the Audiovox P-963ESP offers advanced technology such as anti-shock protection, ensuring that playback remains smooth even while in motion. This is particularly beneficial for those using the device in vehicles, as it minimizes skipping and interruption caused by bumps or jolts.

The player is designed with user convenience in mind. It comes with a remote control, making it easy to navigate through menus and adjust settings from a distance. The intuitive interface is straightforward, allowing users to access their media and customize playback options effortlessly.

Finally, portability is a key aspect of the Audiovox P-963ESP. Its lightweight design and built-in rechargeable battery make it suitable for travel. Users can enjoy hours of uninterrupted viewing without needing to be plugged into a power source.

In summary, the Audiovox P-963ESP is a powerful and versatile portable DVD player that combines excellent display quality, robust audio performance, and user-friendly features, ensuring an enjoyable entertainment experience anywhere you go.