Invacare Powered Seating manual Arms, Installing/Removing Flip Back Armrests

SECTION 7—ARMS

SECTION 7—ARMS

WARNING

After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result.

Installing/Removing Flip Back Armrests

WARNING

Make sure the flip back armrest release and height adjustment levers are in the locked position before using the wheelchair.

NOTE: For this procedure, refer to FIGURE 7.1.

NOTE: Flip back armrest release lever must be in the unlocked (up-horizontal) position when placing the armrest into the arm sockets.

Installing

1.Visually inspect to ensure flip back armrest release lever is in the unlocked (up-horizontal) position.

2.Slide the flip back armrest into the arm sockets on the seat frame.

3.Install the quick-release pin through the rear arm socket and flip back armrest.

4.Lock the flip back armrest by pressing the flip back armrest release lever into the down (vertical) position.

5.Repeat STEPS 1-4 for the opposite flip back armrest.

Removing

1.Unlock the flip back armrest by positioning the flip back armrest release lever into the up (horizontal) position.

Flip Back Armrest

Flip Back

Locked

Armrest (Down -

Release Vertical)

Lever

	Unlocked
	(Up -
	Horizontal)
Rear
Arm
Socket	Seat
Quick-
	Frame
Release Pin
	Front Arm Socket

FIGURE 7.1 Installing/Removing Flip Back

Armrests

2.Remove the quick-release pin that secures the flip back armrest to the rear arm socket.

3.Pull UP on the flip back armrest and remove the armrest from the arm sockets.

4.Repeat STEPS 1-3 for the opposite flip back armrest, if necessary.

Part No 1122170 53 Formula™ Powered Seating