SECTION
70° and PW93
NOTE: For this procedure, refer to FIGURE 6.4.
1.Remove any accessory from the footrest(s).
2.Remove the footrest from the wheelchair. Refer to Installing/Removing Footrests on page 35.
NOTE: Lay the footrest on a flat surface to simplify this procedure.
3.Remove the mounting screw, washers and locknut that secure the lower footrest assembly to the upper footrest support (FIGURE 6.4).
4.Reposition the lower footrest to the desired height.
5.Reinstall the mounting screw, washers and locknut that secure the lower footrest to the footrest support and tighten securely.
6.Repeat STEPS
7.Reinstall the footrest(s) onto the wheelchair. Refer to Installing/ Removing Footrests on page 35.
8.Reinstall any accessory onto the footrest(s).
| Footrest Support | |
Locknut | Coved | |
Washer | ||
| ||
Coved | Hex Bolt | |
Washer | ||
| ||
| Lower | |
| Footrest |
FIGURE 6.4 Footrest Height Adjustment -
70° and PW93
70° Taper
NOTE: For this procedure, refer to FIGURE 6.5.
1.Remove any accessory from the footrest(s).
2.Remove the footrest from the wheelchair. Refer to Installing/ Removing Footrests on page 35.
Coved Spacer
Mounting Screw
Heel Loop
Footrest
NOTE: Lay the assembly on a flat surface to |
|
improve access to the hardware. | FIGURE 6.5 Footrest Height Adjustment - |
NOTE: Note the position of the spacers before | 70° Taper |
| |
disassembly. |
|
3.Remove the mounting screw and coved spacer that secures the lower footrest assembly.
4.Position the footrest assembly to the desired height.
5.Secure lower footrest assembly with existing mounting screw and coved spacer. Securely tighten.
Part No 1122170 | 37 | Formula™ Powered Seating |
