SECTION 5—WHEELCHAIR OPERATION
Four Way Switch
RearLeft
LED
Right 
Forward
FIGURE 5.1 Using the Four Way Switch
Using the MPJ+ joystick
NOTE: For this procedure, refer to FIGURE 5.2 on page 27.
1.Make sure the wheelchair is on a level surface.
2.Select a drive that has the Actuator Control Switch Mode icon 
displayed.
3.Select the Actuator Control Switch Mode icon (Detail “A”).
NOTE: When Actuator Control Switch Mode is selected, four of the following icons display. The icons indicate the available powered seating operation choices. The location of the icons on the screen indicates the joystick direction or quadrant (Detail “B”) for activation of that operation.
ICON | DESCRIPTION |
|
|
| Smart Tilt Operations |
|
|
| Smart Recline Operations |
|
|
| Smart Center Mount Leg Operations |
|
|
| Combined Power Leg Operations |
|
|
| Elevate Operations |
|
|
| Combined Power Leg Operations |
|
|
| Right Leg Operations |
|
|
| Left Leg Operations |
|
|
| No powered seating operation has been programmed for this quadrant. |
|
|
NOTE: The three icons indicate up/down, up or down, respectively.
4. Select the desired operation using the joystick or an equivalent switch.
NOTE: While operating the powered seating system, the icon for the selected operation will display on the screen along with text describing the current operation (Detail “C”).
Formula™ Powered Seating | 26 | Part No 1122170 |
