Invacare Powered Seating Composite/Articulating Footplate Heel Loop Replacement, Disassembly

SECTION 6—FRONT RIGGINGS

Composite/Articulating Footplate Heel Loop Replacement

NOTE: For this procedure, refer to FIGURE 6.12.

Disassembly

Composite

1.Remove the mounting screw and coved washer that secures the lower half of the footrest to the swingaway footrest assembly.

2.Remove the lower footrest assembly.

3.Remove the mounting screw and locknut that secure the heel loop to the footrest.

4.Slide heel strap over cane of footrest assembly.

Articulating

1.Remove the two mounting screws that secure the heel loop to the articulating footplate.

Assembly

1. Replace heel strap/loop.

	Composite
	Mounting Screw
Cane of	Spacer
Footrest
Assembly	Composite
	Footplate
	Locknut

Articulating

Mounting Screw

Heel Loop

Articulating

Footplate

FIGURE 6.12 Composite/Articulating

Footplate Heel Loop Replacement

2.Reverse steps in Disassembly to assemble.

NOTE: When securing heel loop to the footrest assembly, tighten mounting screw until the spacer is secure.

Formula™ Powered Seating 42 Part No 1122170