SECTION 8—SEAT

Replacing Seat Positioning Strap

NOTE: For this procedure, refer to FIGURE 8.2.

1.Remove the seat cushion from the seat pan.

2.Move the flip back armrests out of the way. Refer to Adjusting Flip Back Armrests on page 54.

3.Remove the two mounting screws, locknuts, washers and quick-release pin tabs that secure the seat positioning straps to the seat frame.

4.Remove the two halves of the seat positioning strap from the rear seat frame.

5.Reposition the two new seat positioning strap inside of the seat frame as shown.

6.Reinstall the two mounting screws and quick-release pin tabs that secure the seat positioning straps to the seat frame and torque to 75 in-lbs.

7.Reinstall the seat cushion onto the seat pan.

Mounting

Holes

Seat Frame

Mounting Screw

Seat Frame

Quick-Release Pin Tab

Locknuts

Mounting Screw

 

 

Washers

Quick-Release

Seat Positioning Strap

Halves

Pin Tab

 

FIGURE 8.2 Replacing Seat Positioning Strap

Part No 1122170

59

Formula™ Powered Seating

Page 59
Image 59
Invacare Powered Seating manual Replacing Seat Positioning Strap