Abocom FE2000 manual Connecting to the Network, LED Indicators

Page 4

Connecting to the Network

Connect unshielded twisted pair (UTP) cable to the RJ-45 connector of media coupler before loading any network driver.

For operation in the100Mbps (100Base-TX) Ethernet network, a Category 5 unshielded twisted pair (UTP) cable should be used to connect between media coupler and 100Mbps hub or switch.

For operation in the 10Mbps (10Base-T) Ethernet network, Category 3, 4 or 5 unshielded twisted pair (UTP) cable could be used to connect between the media coupler and a 10Mbps hub or switch.

LED Indicators

- 3 -

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Quick Installation Guide Hardware Installation Inserting the CardBus Dual-Speed PC CardRemoving the CardBus Dual-Speed PC Card Connecting to the Network LED IndicatorsSoftware Installation Windows 95 Installation Determining the Version of WindowsSelect Control Panel System iconNative Windows Select Control Panel. And the Control Panel show up Select the CardBus Fast Ethernet 10/100 Adapter manual loadPage OSR2 Windows 95 and Later Page Windows 98 Installation Page Page Page Windows 2000 Installation Page Page Windows NT 4.0 Installation Open My Computer Open Control Panel iconWindows NT 3.5x Installation
Top Page Image Contents