12.Click OK. A dialog box will appear to adjust the driver's settings. The resources assignment to adapter should be uniqe in the system.
13.The Newwork window reopens.
14.Click OK
15.Insert your original Windows 95 CD or disk set. Input the drive which contain the source. Click OK
16.After the copy file process is complete, the system will promt you to restart the Computer.
17.For the first time installation, you need to go to the Network in the Control Panel to setup the protocols, clients and services properly according to your need.
Note: If you start the computer without the CardBus 10/100 Ethernet PC Card installed in the socket, the native Windows 95 system will prompt you the warning message “Your Network Adapter
CardBus Fast Ethernet 10/100 Adapter manual load”[0001] is not working properly.
- 8 -