Abocom FE2000 Windows 95 Installation, Determining the Version of Windows, Select Control Panel

Page 6

Windows 95 Installation

Windows 95 released two major versions at the time when this manual is written. The first version ( refer to “Native Windows 95” afterward ) supports for 16-bit PC Card but not for CardBus PC Card. The latest version Windows 95 with OEM Service Release #2 ( refer to OSR2 Windows 95 or later ) supports both 16-bit and CardBus PC Card. The CardBus 10/100M Ethernet PC Card could operates in either Native or OSR2 version Windows 95 environments. However, the installation procedures are different. The section will presents you how to identify your version of Windows 95 first. Then you could decide which kind of installation process should be followed:

Determining the Version of Windows 95

1.After successfully booting and login the Windows 95. Click on the Start Button.

2.Select the Settings.

3.Select Control Panel.

4.Within the Control Panel, double-click the

System icon.

5.Select the General Tab, this system information will displayed like the following figure.

- 5 -

Image 6
Contents Quick Installation Guide Hardware Installation Inserting the CardBus Dual-Speed PC CardRemoving the CardBus Dual-Speed PC Card Connecting to the Network LED IndicatorsSoftware Installation Select Control Panel Windows 95 InstallationDetermining the Version of Windows System iconNative Windows Select Control Panel. And the Control Panel show up Select the CardBus Fast Ethernet 10/100 Adapter manual loadPage OSR2 Windows 95 and Later Page Windows 98 Installation Page Page Page Windows 2000 Installation Page Page Windows NT 4.0 Installation Open My Computer Open Control Panel iconWindows NT 3.5x Installation