Paxar TC6039OH manual Cleaning the Platen Roller

Page 35

Cleaning the Platen Roller

Clean the platen roller when you see significant adhesive build-up or when a label is wrapped around the platen roller.

1.Turn off the printer and open the supply cover.

2.Remove the supplies. See “Removing Supplies” in Chapter 3 for more information.

3.Hold the printer upright and gently press down on the label deflector. It may be stiff.

4.Use a dry, soft-bristle brush, such as a toothbrush, to clean the platen roller.

5.Turn the platen roller with your finger and then continue cleaning.

6.Reload the supplies, close the label deflector and supply cover.

Platen Roller

If the brush does not remove all the adhesive use isopropyl alcohol ONLY on the platen roller.

Moisten a cotton swab with isopropyl alcohol and run the cotton swab across the platen roller. Turn the platen roller with your finger to make sure it is clean all the way around. After cleaning, feed several inches of supply through without printing to remove any remaining isopropyl alcohol.

Care & Maintenance 5-3

Image 35

Contents

Page Trademarks B L E O F C O N T E N T S Entering & Printing Data Iii Page T R O D U C T I O N D i e n c e I n g t h i s M a n u a lL p f u l R e m i n d e r s T t i n g S t a r t e dT a c h i n g t h e S a f e t y S t r a p I n g t h e M a i n B a t t e r y Charging the Main BatteryBattery Use Changing the Main Battery A r g i n g t h e B a c k u p B a t t e r y E c k i n g t h e B a t t e r y S t a t u s Power Supply DescriptionI n B a t t e r y S a f e t y I n f o r m a t i o n 6Operator’s Handbook A d i n g S u p p l i e s I N G S U P P L I E SPull back the supply lock tab Loading for Peel Mode Applicator Roller Peel Bar Label Deflector Loading for Non-Peel Mode Supply Type Used For L e c t i n g t h e S u p p l y T y p eM o v i n g S u p p l i e s i n P e e l M o d e 8Operator’s Handbook Keys Description I n g t h e K e y p a dEntering Data Entering Special Characters/SymbolsReading the Status Bar Indicator DescriptionI n g t h e D i s p l a y Scanner LED Description A n n i n g B a r codesR t i f i c a t i o n N o t e J u s t i n g t h e P r i n t C o n t r a s t I n t i n gSupply Type Used For Select W e r M a n a g e m e n t D i o F r e q u e n c y C o m m u n i c a t i o n s E a n i n g R E & M a I N T E N a N C ECleaning the Printhead Cleaning the Platen Roller Cleaning the Sensors Cleaning the Pinch and Feed RollersCleaning the Scanner Flex Cable Cleaning the Scanner WindowO r i n g t h e P r i n t e r E a r i n g S u p p l y J a m sProblem Solution TroubleshootingE c k i n g t h e S o f t w a r e V e r s i o n I n t i n g a T e s t L a b e l Codes Description Error CodesC h n i c a l S u p p o r t Specification s Part Number Description C e s s o r i e sPage Toll Free