Paxar 9465, 9462 manual A d i n g S u p p l i e s

Page 4

Note: If the printer does not have a main battery or is not connected to the Battery Backup Power, it loses its charge and the printer’s system settings.

5.Remove the main battery from the battery compartment.

6.Connect the Battery Backup Power as shown.

L o a d i n g S u p p l i e s

1.Turn on the printer.

2.Press the latch buttons and open the supply cover.

Supply

Cover

Latch Buttons

3.Pull back the supply lock tab.

4.Open the spring-loaded supply holder. Spread the supply holder tabs apart with one hand so it adjusts to the size of your supply roll. You can set it at 1.2”, 1.5”, and 2.0”.

Supply Holder

5.Press the supply lock tab down to lock the supply holder in place.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents I C K R E F E R E N C E T t i n g S t a r t e dT a c h i n g t h e S a f e t y S t r a p A n g i n g t h e M a i n B a t t e r y A r g i n g t h e B a c k u p B a t t e r yA d i n g S u p p l i e s Loading for Non-Peel Mode Loading for Peel ModeM o v i n g S u p p l i e s i n P e e l M o d e A n g i n g t h e D i s p l a y S e t t i n g s I n g t h e K e y p a dEntering Special Characters/Symbols Cleaning the PrintheadE a n i n g t h e P r i n t e r Entering DataCleaning the Pinch and Feed Rollers Cleaning the Black Mark SensorCleaning the On-Demand Sensor Cleaning the Platen RollerCleaning the Scanner Window and Display Screen Cleaning the Scanner Flex CableClearing Supply Jams Troubleshooting Problem SolutionError Codes Codes Description
Top Page Image Contents