Paxar 9462, 9465 manual Loading for Non-Peel Mode, Loading for Peel Mode

Page 5

6.Place a roll of supply in the supply holder so it unrolls from the bottom.

7.Load the supplies for the printing mode you want: Peel or Non-Peel.

Loading for Non-Peel Mode

1.Feed the supply under the applicator roller and over the label deflector.

Applicator Roller

Label

Deflector

2.Close the supply cover.

3.Select Load Supply from the printer icon menu, choose your supply type, and then select Calibrate.

Loading for Peel Mode

1.Peel and discard the first four inches of labels from the backing paper.

2.Hold the printer upright and gently press down on the label deflector. It may be stiff.

Label Deflector

5

Image 5

Contents T t i n g S t a r t e d I C K R E F E R E N C E T a c h i n g t h e S a f e t y S t r a p A r g i n g t h e B a c k u p B a t t e r y A n g i n g t h e M a i n B a t t e r yA d i n g S u p p l i e s Loading for Peel Mode Loading for Non-Peel ModeM o v i n g S u p p l i e s i n P e e l M o d e I n g t h e K e y p a d A n g i n g t h e D i s p l a y S e t t i n g sCleaning the Printhead Entering Special Characters/SymbolsE a n i n g t h e P r i n t e r Entering DataCleaning the Black Mark Sensor Cleaning the Pinch and Feed RollersCleaning the On-Demand Sensor Cleaning the Platen RollerClearing Supply Jams Cleaning the Scanner Flex CableCleaning the Scanner Window and Display Screen Problem Solution TroubleshootingCodes Description Error Codes