Error Codes
Following are some common error codes you may receive. See your System Administrator if you receive any codes not listed here.
Code(s) | Description | |
004 | – 005 | Supply size is incorrect. Reload the correct supplies. |
|
|
|
267 | – 271 | Communication error. See your System Administrator. |
410 – 413 |
| |
703 | – 704 | Load supplies or make sure they are loaded correctly. |
|
|
|
750 |
| Printhead is overheated. Turn off the printer to let it cool. |
751 | – 753 | Check the supplies to see if they are loaded correctly. |
756 |
| The printer is out of supplies. Load supplies. |
|
|
|
757 |
| The calibrated supply length differs by plus or minus .25 |
|
| inches from the format. Load supplies. |
758Check supply. Either the supply is not seen, or the on- demand sensor is broken (purchase optional). Check for a label jam. Clear the supply path or reload supplies.
The printer does not recalibrate after this error.
762 |
| Low battery. Recharge the battery. |
763 |
| Waiting to dispense label. Press Enter. |
768 |
| Printhead error. See your System Administrator. |
790 | – 791 | Turn off the printer. Wait two seconds and turn it back on. |
904 | – 911 | System error. See your System Administrator. |
SYSTEM | System error. See your System Administrator. | |
ERROR |
| |
VECTOR ## |
|
12