Paxar 9640 manual How to load the printer, Loading Label or Card Stock, Loading Stock

English

Operators Handbook English

Paxar Monarch 9640 Series

4How to load the printer

(a) Loading Label or Card Stock

The labels can be loaded internally or mounted externally on the optional external supply holder.

(b) Loading Stock

1.Lift the printer top cover and keep it in the open position.

2.Slide the two print head latches toward the rear and unlock the print head module.

3.	Raise the print head module.	guide
4.	Fit the label supply holder through the
	1" (25mm)-label core of your labels.
	The guide should be fitted on the right
	side of the labels.
5.	Make sure there is no exposed
	adhesive from un-backed labels before
	attempting to load the printer.
6.	Feed the labels through the printer until
	they are beyond the print head.
7.	Set the label roll into the internal roll
	holder.
8.	The printer has an internal label guide	print head latch

to aid the easy path of the label through the printer. Adjust this to the correct width of your supply.

9.Press the print head module down firmly until it snaps into place on both sides.

10. Close the top cover.	print head
	latch

9640 Series

4