DElete
Removes configuration item .
EXIT
Exits console mode .
HELP
Displays the list of available commands .
INIT
Saves settings and initializes unit .
PUrge
Removes configuration item .
SAVE
Saves configuration settings .
SET DEFAULT
Sets print server to factory defaults .
SET LOAD [EN/DI]
Enables or disables firmware reload after exit.
SET LOAD HOst <name>
Sets node name of boot host (NetWare firmware load).
SET IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SET LOAD SOftware <filename>
Sets host firmware filename to load.
SET LOAD XModem
Begins XMODEM serial download of new firmware.
SET PAssword <password>
Sets console password (default is ACCESS).
SET PORT <parallelportname> BIDir [EN/DI]
Enables or disables
SET PORT <parallelportname> DMA [EN/DI]
Enables or disables dma support on parallel port.
SET PORT <parallelportname> FSTB [EN/DI]
Enables or disables fast strobe mode support on parallel port.
Telnet Console Commands