2SUPERSTACK® 3 SWITCH 3226 AND SWITCH 3250 SOFTWARE VERSION 1.02 RELEASE NOTES
The software is available in two versions:
■s3201_02.bin — Provides normal levels of encryption with keys of up to 56 bits in length.
■s3201_02s.bin — Provides higher levels of encryption including
The Switch ships with software providing normal levels of encryption.
Errors and Omissions
The system console speed command is available on the unit but has been omitted from the “SuperStack 3 Switch 3226 and Switch 3250 Management Quick Reference Guide” and the “SuperStack 3 Switch 3226 and Switch 3250 Management Interface Reference Guide”.
To change the speed of the console port:
1Enter system console speed from the
2Enter the speed at which you want to set the console port or ? to see a list of available speeds.
SuperStack 3 Switch 3226 and Switch 3250 Getting Started Guide
Pages 15 and 16 contain the following statement:
“The console port uses a standard null modem cable and is set to
This is incorrect. It should read:
“The console port uses a standard null modem cable and is set to 19200 baud, 8 data bits, no parity and 1 stop bit.”
If you change the speed, make a note of the new setting. If you cannot connect using the console port and do not know the speed at which it is set, connect using a network port and enter the
system console speed command to check the speed of the console port.
Enhancements and Fixes for Known Faults
The following features and enhancements are supported in version 1.02.
Web Interface
The unit only allows printable ASCII characters, with character codes between 32 and 127, to be used for strings such as the unit location or VLAN name.
Characters such as those used for accented letters in