3Com S200 manual #106, Network Parity, #107, Idle Disconnect Timer, #108, Disconnect Character

Page 45

PAD Profile Table Record

#106, Network Parity

Range:

0 to 4

 

 

Default

0

 

 

Description:

Specifies the parity of data the PAD sends to the network:

 

 

 

• 0:Transparent.

 

 

 

• 1: Space.

 

 

 

• 2: Mark.

 

 

 

• 3: Even.

 

 

 

• 4: Odd.

 

 

 

Note

 

 

 

 

 

 

 

 

For most applications, select Transparent (0), which allows data to

 

 

pass through the PAD with the least amount of processing and

 

 

greatest amount of throughput.

 

 

 

 

#107, Idle Disconnect Timer

Range:

0 to 255

 

 

Default:

0

 

 

Description:

Specifies that a call is cleared if there is no user data during a

 

specific number of minutes:

 

• 0: Disabled.

 

• 1 to 255: Time in minutes.

 

 

#108, Disconnect Character

Range:

0 to 127

 

 

Default:

0

 

 

Description:

Specifies the ASCII character used to disconnect a call:

 

• 0: Disabled.

 

• 1 to 127: Decimal value of the call disconnect character.

 

 

Configuring PAD/ATPAD Ports

39

Page 44 Page 46
Image 45
Page 44 Page 46
Contents 3Com Corporation Restricted Rights Legend Restricted Rights Notification for U.S. Government UsersProprietary Material Page Contents Page Overview Configuring PAD/ATPAD PortsIntroduction Before You BeginAbout Packet Assembler/Disassembler Example Typical ApplicationsPAD Port Configuration Configuration RecordPAD Port If You Specify or Set Then GuidelinesStep Action Result Parameters Connection TypeUse Connection Type When Port Control Use Connection TypeAuto Baud Sequence Port SpeedCRONLY, CRDOTCR, TYMNET, Telenet CronlyDevice Parity Data Bits per CharacterNONE, SPAC, MARK, EVEN, ODD, Auto Number of Stop BitsNONE, AUTO, AUTC, PCUD, IBAR, OBAR, MNEM, Tmnem Call ControlTerminal Control NONE, PASS, LIM, CUG, LCPY, 7BIT, NADD, X.28, CnuiCUGOA, BMSG, ADDR, FRCB, Cugia PAD Prompt Entry Number Autocall Timeout secRemote PAD Parameters Number Autocall MnemonicSubaddress Maximum Number of Autocall AttemptsGroup Subaddress CUG MembershipCall Accept Timeout sec Billing RecordsInvitation to clear Protection Level Reconnection TimeoutNONE, CPONLY, Fulldcp Reconnection Tries LimitMaximum Receive Buffer Length Calling DTE PasswordCalled DTE Address Calling DTE IdentifierNUI verification timer PAD Command LanguageNUI Facility Format Max NUI violationsNONE, DISC, DEGR, Lock Action Type for NUI violationsInitiating an AutoCall Mnemonic Addressing PAD Port Configuration for AutocallingSdlc Mnemonic Autocall Addressing Sdlc Mnemonic AddressingPAD Port Configuration for Autospeed How It Works PAD XON/OFF Support Using X.25 Interrupt PacketsStep Action PAD Prompt Table Record Before You Begin Accessing the PAD Prompt Table RecordWhat You See This RecordPAD Prompt Table Record Parameters Entry NumberPAD Prompt Text Introduction What You See In This Record PAD Profile Table RecordConfiguration Guidelines Accessing the PAD Profile Table RecordSelect PAD Profile Table from #1, PAD Recall PAD Profile Table Record Parameters#4, Idle Timer Delay #2, Echo#3, Data Forwarding Character #5, Device Flow Control #6, Service Signals Control#7, Break Signal Operation #9, Padding After Carriage Return#10, Line Folding #13, Line Feed Insertion after CR #12, PAD Data Restraint#15, Editing #14, Padding after LF#16, Character Delete #17, Line Delete#19, Editing Type #18, Line Display#21 Parity Treatment #20, Echo Mask#100, Break Character #22, Page Wait#101, Echo Substitution Toggle Character #102, Echo Substitution Character#105, Control Signal EIA-232-D Data Restraint #103, XON Character#104, Xoff Character #107, Idle Disconnect Timer #106, Network Parity#108, Disconnect Character #109, Form Feed Padding #110, Esc Forwarding Delay Handling#111, Echo Control #112, Dynamic Data Forwarding#113, Hewlett-Packard Flow Control #114, PAD Mode #116, Short Timer Duration#115, Data Forwarding Criteria #117, EIA Signalling Action #118, Message Assembly#119, DCD to Data Timer Duration PAD Profile Table Copying PAD Profile Tables into a ConfigurationSize Select Copy/Insert RecordParameter Name Default Test Simple Transpar Parameter Values Stored In MemoryPrinter TPA Hpea Hpxon Host Rmot Parameter NameTPA Hpea Hpxon Host Rmot Parameter INT1984 IRANSP1 PAD BulletinMessage Select Remote PAD Parameter Remote PAD Parameter Table RecordRemote PAD Parameter Table Record Parameters #1 Parameter Number #1 Parameter Value Function Detailed PAD Port StatisticsDescription Terms First Screen Screen Term Tells YouExample of Detailed PAD Port Statistics, Second Screen NullDescription Terms Second Screen Example of Detailed PAD Port Statistics, Third Screen Atpad Ports Data Forwarding Criteria Atpad OperationCriteria Descriptions If you want to Then useXON/XOFF Flow ControlAtpad Application Environment Network Parity Application Response Delay DTR TimeoutUse these guidelines when you enter Atpad commands ConfigurationConfigure Atpad Port Menu NULL, PAD, X25, SDLC, FRI, ATPAD, PPP Port TypePAD SIMP, DTRParity Data BitsNONE, SPAC, MARK, EVEN, ODD Stop BitsLine Feed Character Carriage Return CharacterBack Space Character Data Forwarding CharacterData Forwarding Timer Escape Sequence TimerXON Character NONE, CNTL, XoffPacket Size Answer ModeEcho Stored AddressesALPHA, NUM, None Result CodesAlpha Restricted Connection DestinationProtocol ID Network ParityNONE, SPAC, MARK, Even Atpad Port Statistics Screen Atpad Port StatisticsNull Description Terms Second Screen Technical Support Country Data Rate Telephone Number Access by Analog ModemSupport from 3ComCountry Telephone Number Country Telephone Number Fax Number ReturningIndex SymbolsNumerics ApadIndex-2 URL Sdlc
Related manuals
Manual 31 pages 49.52 Kb Manual 12 pages 51.58 Kb

S200 specifications

The 3Com S200 is a cutting-edge networking solution designed to meet the demands of small to medium-sized businesses. Renowned for its reliability and performance, this switch offers seamless integration and enhances network efficiency through advanced features and technologies.

One of the standout features of the 3Com S200 is its versatility. With a variety of ports ranging from 8 to 48, the switch provides ample connectivity options for various devices. This flexibility makes it an ideal choice for businesses aiming to expand their network without the need for extensive infrastructure changes. Built-in support for Power over Ethernet (PoE) enables users to connect and power devices such as IP phones and cameras, simplifying wiring and installation.

Performance is another key characteristic of the 3Com S200. Equipped with Layer 2 switching capabilities, the S200 allows for intelligent traffic management and efficient data handling. It supports advanced features like VLAN tagging, which facilitates network segmentation, improving security and performance. Additionally, the switch boasts a user-friendly interface that enables streamlined management, making network monitoring and configuration easily accessible even for non-technical staff.

The durability and reliability of the 3Com S200 are further enhanced by its robust design. Built to handle the rigors of a business environment, the switch features a fanless design for quiet operation, making it suitable for office use where noise may be an issue. With energy-efficient technology, the S200 not only minimizes power consumption but also contributes to cost savings over time.

Security is a priority for modern networks, and the 3Com S200 excels in this area. It offers features such as port security and access control lists to protect sensitive data and manage user access. Moreover, support for SNMP (Simple Network Management Protocol) facilitates proactive network management and monitoring, allowing businesses to address potential issues before they escalate.

In conclusion, the 3Com S200 stands out as a reliable, efficient, and secure networking solution. With its versatile port options, Layer 2 capabilities, user-friendly management interface, and robust security features, it is an excellent choice for businesses looking to enhance their network infrastructure. Whether scaling operations or optimizing current performance, the 3Com S200 provides the technology and reliability needed to thrive in today’s digital landscape.
Top Page Image Contents