3Com 7000 manual Documentation, CoreBuilder Family ATM Switch Documents

Documentation 11

Table 3 Text Conventions (continued)

Convention	Description
Commands	The word “command” means that you must enter the
	command exactly as shown and then press Return or Enter.
	Commands appear in bold. Example:
	To remove the IP address, enter the following command:

	SETDefault !0 -IP NETaddr = 0.0.0.0
The words “enter”	When you see the word “enter” in this guide, you must type
and “type”	something, and then press Return or Enter. Do not press
	Return or Enter when an instruction simply says “type.”
Keyboard key names	If you must press two or more keys simultaneously, the key
	names are linked with a plus sign (+). Example:
	Press Ctrl+Alt+Del
Words in italics	Italics are used to:
	■ Emphasize a point.
	■ Denote a new term at the place where it is defined in the
	text.
	■ Identify menu names, menu commands, and software
	button names. Examples:
	From the Help menu, select Contents.
	Click OK.

Documentation

CoreBuilder 7000

Family ATM Switch

Documents

This section provides information about supporting documentation, including:

■CoreBuilder 7000 Family ATM Switch Documents

■Related Documents

■Documentation Road Map

The CD-ROM that comes with your system contains on-line versions of the documents:

■CoreBuilder 7000 Family ATM Switches Installation and Startup Guide

This guide describes how to install and setup a CoreBuilder 7000 family ATM switch.