3Com 2900 manual Load File Name

The PC and the TFTP server can be the same device.

2)Run the TFTP Server program on the sever

Run TFTP Server on the server connected with the switch’s Ethernet port, and specify the path of the application file to be downloaded.

3)Run the terminal emulation program on the PC connected with the switch’s console port. Start the switch and enter the Boot ROM menu. Then enter the protocol parameter setting menu.

If you want to load the Boot ROM file, enter 6 in the Boot ROM menu after the system displays “Enter your choice(0-9):” to enter the Boot ROM update menu.

1.Update full BootRom

2.Update extended BootRom

3.Update basic BootRom

0.Return to boot menu

Enter your choice(0-3):

4)Enter the protocol parameter setting menu

Enter 1 to update the complete Boot ROM file, and then enter the protocol parameter setting menu.

Bootrom update menu:

1.Set TFTP protocol parameter

2.Set FTP protocol parameter

3.Set XMODEM protocol parameter

0.Return to boot menu

Enter your choice(0-3):

5)Configure the switch to upload the Boot ROM file through TFTP

Enter 1 to update the Boot ROM file using TFTP, and then set the TFTP parameters.

The parameters are described in Table 5-4.

Table 5-4Description of the TFTP parameters

5-12