3Com 09-0487-002 manual Press the Reset button once, or enter the reset command

Page 3

LinkBuilder FDDI Workgroup Hub User Guide Release Note 3

Removing modules from the hub with the power on will not damage the hardware. However, the software may not be able to distinguish between intentional removal and catastrophic failure of a media module. As a result, some errors will be entered in the fault log and in some cases may fill the fault log entirely. The most common error resulting from the removal of a media module is 05000002 (bus error). Other errors may also occur. Check the fault log for valid errors before you remove any module. Also, clear the fault log (using the clear log command) after all changes are complete and the system has been reinitialized.

Pages 3-9, 3-10, and 3-11: Accessing the Primitive Console Command Mode

The procedure for accessing the primitive console command mode has been modified. To access the primitive console command mode:

1.Press the RESET button once, or enter the reset command.

During the subsequent power-on self-test (POST), the status LED flashes amber/green for 10 seconds, indicating that the primitive console command mode is being accessed.

2.Press the RESET button again.

POST is reinitialized. When POST is completed, this prompt appears for

10 seconds:

Press Ctrl-P to enter Primitive console

All other keys except [Ctrl] and [P] are ignored during this 10-second interval.

3.Press [Ctrl] + [P].

The hub is now in the primitive console command mode.

If you do not access the primitive console command mode, POST executes the system software resident in flash memory. Prior to execution of the system software, POST verifies that flash memory is not corrupted. This process takes about 20–30 seconds. During this time the status LED is off.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Change in FCC Compliance Contents of the LinkBuilder Diskette2-14 Removing Modules 2-14 Check the Baud Rate Setting After PostCorrections in the User Guide Software-Related CorrectionsPress the Reset button once, or enter the reset command 5-21 Fault Log Display 5-20 route dump and route add Commands1-7 Media Flexibility A-7 Management Module Failure Error CodeC-22 show rev Command Hardware-Related Corrections2-22 Note 2-21 Unshielded Twisted-Pair CableReplacing the Fuse Opening the Fuse-holder in the AC Receptacle AssemblyRemoving the Fuse

09-0487-002 specifications

The 3Com 09-0487-002 is a robust network interface card (NIC) designed to meet the demands of modern networking environments. Known for its reliability and performance, this card is particularly suited for businesses looking to enhance their networking capabilities.

One of the main features of the 3Com 09-0487-002 is its compatibility with various operating systems, which ensures that it can be seamlessly integrated into diverse IT infrastructures. This flexibility enables businesses to upgrade their existing systems without the need for extensive changes to their hardware setup.

The NIC supports both wired and wireless connectivity options, providing users with the versatility to adapt to different network environments. This adaptability makes the 3Com 09-0487-002 an ideal choice for organizations that require both stable wired connections and the freedom of wireless networking.

In terms of performance, this NIC boasts impressive data transfer speeds, typically reaching up to 1 Gbps. This allows for quick and efficient data exchange within networks, making it suitable for high-bandwidth applications, such as video streaming and large file transfers. Additionally, the card incorporates advanced technologies such as full-duplex Ethernet, which allows simultaneous sending and receiving of data packets, further enhancing its efficiency.

Security is another critical characteristic of the 3Com 09-0487-002. The card features support for various encryption protocols, ensuring secure data transmission and protecting sensitive information from potential cyber threats. This is particularly vital for businesses that handle confidential data and need to comply with regulatory requirements.

Another noteworthy aspect of the 3Com 09-0487-002 is its ease of installation and user-friendly interface. IT teams can quickly deploy the card with minimal technical expertise, reducing downtime and allowing businesses to enhance their networking capabilities without extensive training.

Lastly, reliability is a hallmark of the 3Com brand, and the 09-0487-002 is no exception. It is built to withstand the rigors of continuous operation, making it a dependable choice for critical business applications. Overall, the 3Com 09-0487-002 network interface card stands out as a feature-rich solution that combines performance, security, and ease of use, making it an excellent addition for any organization looking to bolster its network infrastructure.
Top Page Image Contents