3Com 09-0487-002 manual route dump and route add Commands, Fault Log Display

Page 4

4LinkBuilder FDDI Workgroup Hub User Guide Release Note

After flash memory has been verified, the status LED turns green when the system is fully initialized. Within a short time, the modem initialization string AT&F is briefly displayed. When the AT&F display disappears, you can access the management console command mode by pressing [Enter].

When there is no active console session or if a console session times out, AT&F will be displayed periodically to determine if a modem is present. You must wait for the AT&F to disappear before pressing [Enter] to enter the management console command mode.

Page 5-20: route dump and route add Commands

Changes have been made in the route command display and description. When you enter the route dump command, a metric value appears in the subsequent display, as explained below:

■

■

A metric of 0 indicates that the entry is a host.

A metric of 1 indicates that the entry is a gateway.

You can include a metric of 0 or 1 with the route add command. If you enter a value greater than 1, it is converted to 1. If the metric is not entered, 1 is assumed, which designates the entry as a gateway.

The default gateway, whether entered using the route add command or the set gateway command, sets the metric to 1 regardless of the metric option given.

The metric option does not indicate the number of hops to the destination network, as stated on page 5-20. It does indicate whether the entry is a host or a gateway.

Page 5-21: Fault Log Display

A reset count has been added to the fault log display header. When you enter the show log command, the fault log header appears, as shown in the example below:

Fault Log: [#

10]

The number corresponds to the number of times the hub has been reset and allows you to correlate fault log entries with a given reset shown in the fourth column of the display.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Contents of the LinkBuilder Diskette Change in FCC Compliance2-14 Check the Baud Rate Setting After Post Corrections in the User GuideSoftware-Related Corrections 2-14 Removing ModulesPress the Reset button once, or enter the reset command 5-20 route dump and route add Commands 5-21 Fault Log DisplayA-7 Management Module Failure Error Code C-22 show rev CommandHardware-Related Corrections 1-7 Media Flexibility2-21 Unshielded Twisted-Pair Cable 2-22 NoteOpening the Fuse-holder in the AC Receptacle Assembly Replacing the FuseRemoving the Fuse

09-0487-002 specifications

The 3Com 09-0487-002 is a robust network interface card (NIC) designed to meet the demands of modern networking environments. Known for its reliability and performance, this card is particularly suited for businesses looking to enhance their networking capabilities.

One of the main features of the 3Com 09-0487-002 is its compatibility with various operating systems, which ensures that it can be seamlessly integrated into diverse IT infrastructures. This flexibility enables businesses to upgrade their existing systems without the need for extensive changes to their hardware setup.

The NIC supports both wired and wireless connectivity options, providing users with the versatility to adapt to different network environments. This adaptability makes the 3Com 09-0487-002 an ideal choice for organizations that require both stable wired connections and the freedom of wireless networking.

In terms of performance, this NIC boasts impressive data transfer speeds, typically reaching up to 1 Gbps. This allows for quick and efficient data exchange within networks, making it suitable for high-bandwidth applications, such as video streaming and large file transfers. Additionally, the card incorporates advanced technologies such as full-duplex Ethernet, which allows simultaneous sending and receiving of data packets, further enhancing its efficiency.

Security is another critical characteristic of the 3Com 09-0487-002. The card features support for various encryption protocols, ensuring secure data transmission and protecting sensitive information from potential cyber threats. This is particularly vital for businesses that handle confidential data and need to comply with regulatory requirements.

Another noteworthy aspect of the 3Com 09-0487-002 is its ease of installation and user-friendly interface. IT teams can quickly deploy the card with minimal technical expertise, reducing downtime and allowing businesses to enhance their networking capabilities without extensive training.

Lastly, reliability is a hallmark of the 3Com brand, and the 09-0487-002 is no exception. It is built to withstand the rigors of continuous operation, making it a dependable choice for critical business applications. Overall, the 3Com 09-0487-002 network interface card stands out as a feature-rich solution that combines performance, security, and ease of use, making it an excellent addition for any organization looking to bolster its network infrastructure.
Top Page Image Contents