Rosewill RNX-N250UBE user manual

Page 29

Wireless N Adapter RNX-N250UBE

User Manual

 

 

 

FAQ

This chapter provides solutions to problems that may occur during the installation and operation of the Wireless USB Adapter. Read the descriptions below to solve your problems.

1.The Wireless USB Adapter does not work properly.

Reinsert the Wireless USB Adapter into your PC’s USB slot. Right click My Computer and select Properties. Select the device manager and click on the Network Adapter. You will find the Adapter if it is installed successfully. If you see the yellow exclamation mark, the resources are conflicting. You will see the status of the Adapter. If there is a yellow question mark, please check the following:

Make sure that you have inserted the right adapter and installed the proper driver. If the Adapter does not function after attempting the above steps, remove the adapter and do the following:

Uninstall the driver software from your PC through Control Panel’s “Add or Remove Programs”.

Restart your PC and repeat the hardware and software installation as specified in this User Guide.

2.I cannot communicate with the other computers linked via Ethernet in the Infrastructure configuration.

Make sure that the PC to which the Adapter is associated is powered on.

Make sure that your Adapter is configured on the same channel and with the same security options as with the other computers in the Infrastructure configuration.

3.What should I do when the computer with the Adapter installed is unable to connect to the wireless network and/or the Internet?

Check that the LED indicators for the broadband modem are indicating normal activity. If not, there may be a problem with the broadband connection.

Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and Ethernet cables are firmly connected.

Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered for the network.

In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the settings for the wireless clients and access points.

In Ad-Hoc mode, both wireless clients will need to have the same SSID. Please note that it might be necessary to set up one client to establish a BSS (Basic Service Set) and wait briefly before setting up other clients. This prevents several

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents User Manual Wireless N Adapter RNX-N250UBE2400.0-2483.5 MHz Wireless N Adapter RNX-N250UBECountry RestrictionWireless N Adapter RNX-N250UBE Table of Content 1.1 Overview of the Product Package ContentChapter 1 Overview You must have at least the following 1.2 Features1.3 System Requirement 1.4 Specification 2.1 Software Installation Chapter 2 Installation Guidez Follow the InstallShield Wizard steps, and click Finish when done z Click Next z Click Install to start installingz Now your PC or notebook will restart automatically 3.1. Connecting with Microsoft Zero Configuration tool Win XP Chapter 3 Wireless Connection Guide3.2. Connecting with Window 3.3. Connecting with Wireless LAN Utility 3.3.2 Step 2 Select and Add to Profile 3.3.1 Step 1 Search Available NetworkAfter click “Add to Profile”, you will see the next window “Wireless Network Properties” popup with your current wireless signal’s setting. RNX-N180PCe will detect the current setting of your SSID. So after the “Wireless Network Properties” popup, all you need to do is to enter the password of your SSID and click OK to continute 4.1. General Chapter 4 Utility Configuration - Win XP’s Station ModeNetwork Address 4.2. ProfileOthers z Create a new Infrastructure mode profilez Create a new ad-hoc mode profile created a profile 4.2.3 EditSelect a profile which you want to copy and then click Duplicate 4.2.4 DuplicateModify the profile information according to your demand Import the new profile name in the popup window blank 4.2.5 Set defaultDouble-click the network to which you wish to connect 4.3. Available Network4.4. Status 4.5. Statistics 4.6.1 Method 1 PIN Input Config PIN 4.6. Wi-Fi Protect Setup2. Click Pin Input ConfigPIN WPS config page2. Click Start PBC on the AP-Router WPS config page 4.6.2 Method 2 Push Button1. Click Push Button ConfigPBC on Wi-Fi Protect Setup page Remark Page clients from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple clients associated to it
Top Page Image Contents