Rosewill RNX-N250UBE user manual Specification

Page 7

Wireless N Adapter RNX-N250UBE		User Manual

1.4Specification

	Specifications

	Standard	IEEE 802.11n, IEEE 802.11g, IEEE 802.11b

	Interface	USB 2.0

	Frequency Range	2.4-2.4835GHz

	Wireless Transmit Power	18dBm (max. EIRP)

	Modulation Technology	OFDM/CCK/16-QAM/64-QAM

	Security	Support 64/128 bit WEP, WPA-PSK/WPA2-PSK

	Antenna	2x external detachable 5dBi Antenna

	System Support	Windows 2000/ XP/ Vista/ 7 (32/64bit), Linux Kernel 2.6.x, and MAC
	System Support	OSX 10.4, 10.5, 10.6, 10.7
		OSX 10.4, 10.5, 10.6, 10.7

	Temperature	Operating: 0°C~40°C (32℉~104℉)

		Storage: -40°C~70°C (-40℉~158℉)
		Storage: -40°C~70°C (-40℉~158℉)

	Humidity	Operating: 10% - 90%, Non-Condensing

		Storage: 5%~90% Non-Condensing
		Storage: 5%~90% Non-Condensing

	Dimensions	3.3" x 0.98" x 0.5" (84 x 25 x 13 mm, excluded Antenna and cradle)

	Weight	0.02 lbs. (10g, excluded Antenna and cradle)

7

Image 7

Contents User Manual Wireless N Adapter RNX-N250UBERestriction Wireless N Adapter RNX-N250UBE2400.0-2483.5 MHz CountryWireless N Adapter RNX-N250UBE Table of Content Chapter 1 Overview Package Content1.1 Overview of the Product 1.3 System Requirement 1.2 FeaturesYou must have at least the following 1.4 Specification 2.1 Software Installation Chapter 2 Installation Guidez Follow the InstallShield Wizard steps, and click Finish when done z Click Next z Click Install to start installingz Now your PC or notebook will restart automatically 3.1. Connecting with Microsoft Zero Configuration tool Win XP Chapter 3 Wireless Connection Guide3.2. Connecting with Window 3.3. Connecting with Wireless LAN Utility 3.3.2 Step 2 Select and Add to Profile 3.3.1 Step 1 Search Available NetworkAfter click “Add to Profile”, you will see the next window “Wireless Network Properties” popup with your current wireless signal’s setting. RNX-N180PCe will detect the current setting of your SSID. So after the “Wireless Network Properties” popup, all you need to do is to enter the password of your SSID and click OK to continute 4.1. General Chapter 4 Utility Configuration - Win XP’s Station Modez Create a new Infrastructure mode profile 4.2. ProfileNetwork Address Othersz Create a new ad-hoc mode profile created a profile 4.2.3 EditModify the profile information according to your demand 4.2.4 DuplicateSelect a profile which you want to copy and then click Duplicate Import the new profile name in the popup window blank 4.2.5 Set defaultDouble-click the network to which you wish to connect 4.3. Available Network4.4. Status 4.5. Statistics 4.6.1 Method 1 PIN Input Config PIN 4.6. Wi-Fi Protect Setup2. Click Pin Input ConfigPIN WPS config page1. Click Push Button ConfigPBC on Wi-Fi Protect Setup page 4.6.2 Method 2 Push Button2. Click Start PBC on the AP-Router WPS config page Remark Page clients from trying to establish a BSS at the same time, which can result in multiple singular BSSs being established, rather than a single BSS with multiple clients associated to it