Rosewill RP500-2-S, RP550-2-S user manual Regulatory Compliance

Page 7

PERFORMANCE

5. Regulatory Compliance

5.1Safety Requirement -CSA

-UL -TUV

-FCC CLASS B

5.2Dielectric Strength

Primary to Secondary: 1500 VAC for 1~3 seconds.

Primary to Frame Ground: 1500 VAC for 1~3 seconds.

5.3 Insulation Resistance

Primary to Secondary: 20 Meg. ohm Minimum.

Primary to Frame Ground: 20 Meg. ohm Minimum.

5.4 Ground Leakage Current

The power supply ground leakage current shall be less than 3.5mA.

5.5 Ground Continuity

The power supply grounding continuity shall be less than 100m when the test current is at 25A.

5.6 Reliability

The power supply have a minimum predicted MTBF(MIL-STD-217E) of 100,000 hours of conditions operation at 25 , maximum-output load, and nominal AC input voltage.

6

POWER SUPPLY

 

© 2004-2006 Rosewill Inc. All rights reserved by Rosewill

Image 7
Contents Performance Page Page RP550-2, RP550-2-S AC InputDC Output RP500-2, RP500-2-SProtection Physical Environment Regulatory Compliance Pin Floppy Connector x Connectors 20+4 pin Main Connector x20+4 pin Main Connector Installing Power Supply20 pin 24 pin Pin PCI-Express Connector Pin Peripheral Connector Pin ATX +12V or 8 pin EPS +12V ConnectorPin Floppy Connector OFF Before starting your system

RP500-2-S, RP550-2, RP500-2, RP550-2-S specifications

The Rosewill RP550-2-S and its siblings RP550-2, RP500-2, and RP500-2-S are notable power supply units (PSUs) that cater to a wide range of computing needs, especially for gaming and high-performance computing. These models, part of Rosewill’s reputable lineup, are designed with efficiency, compatibility, and reliability in mind, making them a popular choice for PC builders and gamers.

One of the standout features of the Rosewill RP550-2 and RP500-2 series is their certification for energy efficiency. Many of these models boast an 80 PLUS certification, which ensures that they deliver at least 80% efficiency at a range of load states. This not only translates into lower electricity bills but also helps in reducing heat output, leading to quieter cooling performance.

In terms of power output, the RP550-2-S offers a robust 550 watts of continuous power, while the RP500-2 and RP500-2-S provide 500 watts. This ample power capacity supports a variety of system configurations, allowing users to run mid to high-end graphics cards and processors without stability issues. The inclusion of multiple +12V rails provides better distribution of power to the components that require it most.

Cooling is another critical aspect addressed by these models. Featuring a 120mm fan, these power supplies ensure optimal heat dissipation while maintaining quiet operation. The fan’s intelligent design allows for efficient airflow, which is essential for keeping temperatures in check, especially during intensive gaming or resource-heavy tasks.

Connectivity options are generous across these models. They provide multiple PCIe connectors for graphics cards, SATA connectors for solid-state drives and hard drives, and plenty of Molex connectors for additional peripherals. This versatility allows users to build their systems according to their specific needs without running into compatibility issues.

Moreover, Rosewill places a strong emphasis on safety features in the RP series. With built-in protection mechanisms like Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Current Protection (OCP), and Short Circuit Protection (SCP), users can have peace of mind knowing that their components are safeguarded against potential electrical issues.

In summary, the Rosewill RP550-2-S, RP550-2, RP500-2, and RP500-2-S power supplies are designed to meet the demands of modern computing environments. With their focus on efficiency, reliability, and solid performance, these PSUs are ideal for both casual users and enthusiasts looking to build a stable and powerful PC. Whether you're gaming, working, or enjoying multimedia, these units deliver the necessary power and protection to keep your system operating smoothly.