Rosewill RC-209-EX user manual For Windows Vista-x64

Page 22

e-SATA 4 Port PCI Adaptor with RAID RC-209-EX

User Manual

 

 

 

 

 

 

4.At the Windows Setup screen, press Load Driver to install the RAID driver.

5.Insert the floppy disk, please select Silicon Image SiI 3114 Soft Raid 5 Controller (A:\si3114r5.inf), then press Next. (Change A:\ to match your floppy drive letter)

6.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At Found New Hardware Wizard, select Locate and install driver software (recommended).

3.Please insert driver CD, click Next.

4.If the system prompts the user informing the drivers are not signed, select the option Install this driver software anyway.

5.Click Close to complete the installation.

For Windows® Vista-x64

For New Installation

A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the RC-209\64-bit Windows\RAID5” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.

1.Setup the RAID Array prior to Windows installation.

2.Follow Microsoft’s Windows installation procedure.

3.Restart the computer when prompted by Windows’ installation.

4.At the Windows Setup screen, press Load Driver to install the RAID driver.

5.Insert the floppy disk, please select Silicon Image SiI 3114 Soft Raid 5 Controller (A:\si3114r5.inf), then press Next. (Change A:\ to match your floppy drive letter)

6.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.At Found New Hardware Wizard, select Locate and install driver software (recommended).

3.Please insert the driver CD, click Next.

4.If the system prompts the user informing the drivers are not signed, select the option Install this driver software anyway.

5.Click Close to complete the installation.

20

Image 22
Contents Sata 4 Port PCI Adaptor with RAID Content Sata 4 Port PCI Adaptor with RAID RC209Package Contents FeatureConnectors Bus InterfaceHardware Description Step by step photo installation of Magic Switch Available port setting Active InactiveMode 1 Default Abcd Active Hardware Installation Device ConnectionRAID Arrays Auto configuration recommendedImportant message for user RAID 0 StripingSelect Auto configuration, then press Enter RAID 1 Mirror Select Create with data copy, then press Enter Creating a Spare DriveRebuilding a Failed Mirror Set Select Create RAID Set then press EnterRAID 0+1 Mirroring+Striping When asked Are you sure to exitY/N?, press Y to exitSelect Create without data copy then press Enter RAID 5 Parity Low Level Format Deleting RAID ArraysResolving Conflicts Select Delete RAID Set, then press EnterLogical Drive Info Bios ConfigurationDriver Installation Quick guideSata 4 Port PCI Adaptor with RAID RC-209-EX Sata 4 Port PCI Adaptor with RAID RC-209-EX Sata 4 Port PCI Adaptor with RAID RC-209-EX For An Existing Installation For New InstallationDetail guide For Windows For Windows XP/Server For a New InstallationAt the Found New Hardware Wizard For Windows XP-x64/Server For Windows VistaFor Windows Vista-x64 Select Device Manager To Verify Windows InstallationFor Windows XP/Server 2003/Vista Thank you for purchasing a quality Rosewill Product