User Manual |
Important message for user
1.Backup all your data in HD before setting any RAID.
2.New HD connecting to
3.If you want to boot from correct HD either from motherboard HD or
4.Although SATA HD is a “hot swap” design, it is strongly recommended that all users turn off the power before you add any HD to PC.
5.If you want to use
RAID Arrays
RAID Arrays are setup in the Serial ATA
RAID 0 (Striping)
This RAID array to be used on New/Blank hard drives. Striping will destroy existing data on the hard drive. Auto Configuration is recommended. For applications that require custom chunk size, Manual Configuration is offered.
Auto configuration (recommended)
The default chunk size is 64k when selecting Auto configuration.
1. As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS.