Features and Benefits

2 Port eSATA II Express Card RC605		User Manual

zFully compliant with ExpressCard Specification 1.0

zExpressCard/34 Form Factor Module

zSerial ATA generation 2 transfer rate of 3.0Gbps

zAdds two eSATA (external Serial ATA) ports

zSupports Native Command Queuing (NCQ), Non-zero offsets NCQ, and Out-of-order data delivery NCQ

zSupports Hot Plugging on Extend Serial ATA port

Package Contents

z1 x eSATA II 300 2-Port ExpressCard

z1 x Driver CD

z1 x User Manual

System Requirements

zWindows® 2000 /XP 32/64 /Server 2003, Vista 32/64, Linux, Mac OS X

zExpressCard-enabled system with an available ExpressCard slot

Hardware Description

Hardware Installation

General instructions for installing the card are provided below. Since the design of system may vary, refer to your system’s reference manual for further information, if needed.

Insert the Card into the ExpressCard slot of your system. Make sure it is inserted all the way in for a solid connection.

Driver Installation

For Windows® XP/Server 2003

For New Installation

A new installation requires a floppy disk for the driver installation. To make this floppy disk, copy the contents of the

“ExpressCard\2-SATA\SATA” folder, found on the driver CD, onto a blank floppy disk then follow the directions below.