1 Checking Supplied Items / 2 Part Names and Functions
1 Checking Supplied Items
Check the following to make sure that you received all the items that were shipped along with the unit.
• Power Cord | : 1 | • Thermal transfer ribbon cartridge | : 1 |
• Blade (Carbide) | : 1 | • Blade Holder | : 1 |
• Roller Base | : 1 | • Cutter Tool | : 1 |
• Material for Test Cuts | : 1 | • Alignment Tool | : 1 |
• Head Cleaner | : 1 | • Cleaning Sheet for Printing Head | : 1 |
• Hexagonal Screw Driver | : 1 | • User's Manual | : 1 |
2 Part Names and Functions
2-1 Front View
Printing Carriage
The ribbon cartridge is mounted here.
Pinch Roller (Left)
Press material against the grit roller. When loading material, place the left roller inside the left edge of the material to correctly track it through the machine.
Cutting Carriage
The blade holder is mounted here.
Pinch Roller (Right)
This presses the material against the grit roller.
Serial (RS-232C) Input Connector
In a serial configuration, connect the serial cable here. This cable carries data to your computer.
Platen
Grit Roller (Left)
Guide Line
Align the material with these lines when loading.
Grit Roller (Right)
Operation Panel
Parallel (Centronics)
Input Connector
In a parallel configuration, connect the parallel cable here. This cable carries data to your computer.
DIP Switches
Used to make various settings.
Cutter Force Control Slider
Sets the down force for the cutting tool.
2-2 Rear View
Guide Line
Align the material with these lines when loading.
Sheet Loading Lever
Used to raise or lower the pinch rollers when loading or unloading material.
Power Connector (AC IN)
This connector accepts standard AC power cord.
Power Switch
3