OPERATING INSTRUCTIONS
Operating instructions- All units
Once the Remote and Local Units are connected and configured, the Remote KVM station’s keyboard, video monitor and mouse will function as if it were directly connected to the CPU. All applications, upgrades and PC configurations can be performed normally. If you reconnect a keyboard or mouse or if the keyboard or mouse ever locks up, see Table 4 and Table 5 for
Operating instructions – Dual unit
KVM Switching
The CrystalView “Dual” version allows for an additional KVM station to be connected to the Local Unit. The CPU can be operated from the Remote or Local KVM station but not simultaneously. The Local Unit is active during
A lockout feature disables activity from a KVM station until the “In Use” KVM stations keyboard or mouse are inactive for more than 2 seconds. After 2 seconds of inactivity, pressing any key on the “Not in Use” KVMs keyboard or moving the mouse will activate that KVM station and lockout the other KVM station. On the PC and SUN models, changing SW1 switch 2 to the left position can change the time interval of 2 seconds to 15 seconds. The
Private mode (Dual models only)
The private mode feature will disable the keyboard and mouse and blank the video monitor on the Remote or Local Unit. To enter the private mode, execute the command for your model as shown.
Model | Unit | Command |
PC/MINI | Remote | N/A |
|
|
|
PC/MINI | Local | Scroll Lock |
|
|
|
SUN | Remote | Left Control + Scroll Lock |
|
|
|
SUN | Local | Left Control + Scroll Lock |
|
|
|
Remote | Scroll Lock | |
|
|
|
Local | Scroll Lock | |
|
|
|
Table 3. Private mode commands
CRYSTALVIEW INSTALLATION AND OPERATIONS MANUAL
19