Technicolor - Thomson CS520 manual Settings, EN Showing Demonstration, Setting the Clock

CS520 EN 2/23/04 3:56 PM Page 12

Settings

EN Showing Demonstration

Press DEMO to turn on/off demonstration mode. The demonstration scrolls through all display operations.

Setting the Clock

1.Press and hold CLOCK until the hour flashes on the display.

2.Press PRESET - or PRESET + to set the hour and then press CLOCK to shift to minute digits.

3.Press PRESET - or PRESET + to set the minute.

4.Press PROG/SET to save settings and STOP to quit setting.

Note:

When system is ON, you can press CLOCK to display the current time for about 2 seconds.

Setting the Timer

1.Press and hold TIMER until the ON and clock hour flashes on the display ( ON - timer on time ).

2.For setting time, press PRESET - or

PRESET + on the main unit or

FOLDER•PRESET or on the remote control to set the hour and then press TIMER to shift to minute digits.

7

3.Press PRESET - or PRESET + on the

main unit or FOLDER•PRESET or	on
the remote control to set the minute.

4.Press TIMER to change to OF (timer off time) with clock time flashing. Repeat steps 2 & 3 for timer off time setting.

5.Press TIMER to select source. Press PRESET -

	or PRESET +		on the main unit or
FOLDER•PRESET		or		on the remote
control to select between CD				/ TUNER /
TAPE / REC TU.

If REC TU is selected, select the preset station

by pressing PRESET -	or PRESET +		on
the main unit or FOLDER•PRESET		or
on the remote control.

6.Press TIMER to set volume. Adjust VOLUME control to select desired volume level.

7.Press PROG/SET to save settings.

Press STOP to quit setting.

The timer is automatically activated once timer setting is saved.

Activating the Timer

Press and release TIMER to turn on/off the alarm.

The timer icon is displayed when timer is activated.