Legacy Car Audio ML3245, ML3215 manual System Option Settings Menu

Page 7

ENGLISH

9

To set the two-tone option, press the MODE button then the CH SET up or down buttons until the display appears. Press and release the MODE button again to select. Scroll through the sub-menu settings with the up or down buttons, press the MODE button when TWO TONE appears on screen. Settings include:

INDIVID

GROUP

SUPER GR

You can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press the MODE button to select. Next, toggle between On and Off status settings which occur for each above sub-menu.

Example: INDIVE ON, GROUP OF and SGRP ON .

When the desired setting appears on screen, press the MODE button to select. The radio will save your On or Off selection for the current channel and return to standby mode. NOTE: Individual, Group and Super Group frequencies and timing are programmed by your radio communications Dealer.

For quick reference, the next few pages detail the Channel Options Menu, sub-menus and their settings.

Mode Option Setting

Each Channel Setting

 

 

 

 

System Option Setting

 

 

 

 

Display Option Setting

 

 

 

Channel Option Setting

Tone Option

RX Tone

No Tone

 

 

 

 

CTCSS

1-49

 

 

 

DCS

023-754

 

 

 

Invert DCS

023-754

 

 

TX Tone

No Tone

 

 

 

 

CTCSS

1-49

 

 

 

DCS

023-754

 

 

 

Invert DCS

023-754

 

Tx Output Power High/Low

Power High/Low

 

 

Normal Scan List

 

Normal Scan On/Off

 

 

Priority Scan List

 

Priority Scan On/Off

 

2-Tone Option

Individual Tone

On/Off

 

Group tone

On/Off

 

Super Group Tone

On/Off

System Option Settings Menu

To enter the System Option Setting Menu, press and release the MODE button during the receive or standby mode, then use the up or down buttons until SYSTEM appears. Select the above option with a press and release of the MODE button.

(Beep Set, VOX (Voice Operated TX) Set, Time-Out-Timer Set, Penalty, Busy Channel Lockout Set, Marked Idle, Scan Set, Priority Scan, Transmit Delay, Power Save, Clear-To-Talk, Roger Beep, 2 tone alarm, Microphone Hook and Audio Compander). Details on sub-menu settings follow.

You can toggle between these settings with the up or down buttons. When the desired setting appears on screen, press the MODE button to select. If you choose the Beep Set setting, you will need to use the up or down buttons to choose BEEP ON or BEEP OF. When the desired setting appears on screen, press the MODE button to select. The radio will save your On or Off selection and return to standby mode.

If you choose the VOX Set setting, you will also need to choose between On or Off selections, by using the up or down buttons to choose, and the MODE button to select. If you choose On, you will need to choose a VOX level setting, which includes: VOXL L1, VOXL L2 or VOXL L3. You can toggle between these VOX sensitivity level settings with the up or down buttons. When the desired setting appears on screen, press the MODE button. The radio will save your selection and return to standby mode.

If you choose the Time-Out-Timer setting, your choices include: TOTON or TOT OF . Toggle between

the settings with the up or down buttons. When the desired setting appears on screen, press the MODE button. If you choose “On”, you will need to choose the duration of the Time-Out-Timer setting, from 10 seconds to 990 seconds. Use the up or down buttons to toggle, until the desired number of seconds appears on the display. Use the MODE button to select. The radio will save your selection and return to standby mode. Example of display: TOT 990

NOTE: In the Time-Out-Timer sub-menu, if “Off” is selected by pressing the MODE button, the TOT function will be disabled, and the radio will return to standby mode.

If you choose the Time-Out-Timer Penalty setting, your choices include Penalty On or Off. Toggle between the settings with the up or down buttons. When the desired setting appears on screen, press the MODE button. If you choose “On”, you will need to choose the duration of the Penalty setting, from 1 second to 100 seconds. Use the up or down buttons to toggle, then the MODE button to select the desired amount of time. The radio will save your selection and return to standby mode.

Example of display: PNLT 100 .

NOTE: In the Time-Out-Timer Penalty sub-menu, if “Off” is selected by pressing the MODE button, the TOT Penalty function will be disabled, and the radio will return to standby mode.

NOTE: If the radio transmits in excess of the set time, it will beep an error tone and the radio will receive a signal, but will NOT transmit during the penalty time.

If you choose the Busy Channel Lockout setting, your choices include: BCLO ON or BCLO OF . Toggle between the settings with the up or down buttons. When the desired setting appears on screen, press the MODE button. Your radio will save your On or Off selection and return to standby mode.

NOTE: If you select “On”, and the channel is busy, it will inhibit transmission.

If you choose the Marked Idle setting, your choices include On or Off. Toggle between the settings with the up or down buttons. When the desired setting appears on screen, press the MODE button to select. The radio will save your selection and return to standby mode.

Example of display: MARK ON.

NOTE: If the channel is set by Busy Channel Lockout, and transmit is inhibited, Marked Idle allows a transmission when your CTCSS or DCS tone signal is received.

ENGLISH

10

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Impreso en Corea Part No.9300000116 N680-090-2035Spanish Unpacking Information SafetyAbout Topaz3 About Your Legacy ProLine RadioRadio Functions Radio Control Buttons / Operation FeaturesBacklit LCD Features Radio OperationMode Operation and Function Set Up Freq Idcs Tone Signaling Frequency TableCtcss Tone Signaling Frequency Table DCS Tone Signaling Frequency TableSystem Option Settings Menu Beep On/Off Vox Option Vox On/Off Auto Dial Operation Option SettingsWeather Alert Option Setting ACC-733 Dtmf Microphone OperationSoftware Copyrights, Warranty Statement Licensing and Service Information FCC LicensingService MaintenanceSeguridad Requerimientos de Obediencia a la Exposición de RF del FCCIndicador de transmisión TX Indicador de recepción RX Acerca de Topaz3Acerca de Su Radio Legacy ProLine Desempaque y Verificación del EquipoEncienda / Transmite Operación del RadioFunciones del Radio Señal de Tono Graduación de Código de Tono DCS Tabla de Frecuencia de Señalización de Tono CtcssGraduación de Código de Tono Idcs Menù de Graduaciones de Opción del Sistema SpanishMenù de Graduaciones de Opción Visualizadora Operación de Marcado Manual Menù de Configuraciones de la Opción P/AOperación del Micrófono ACC-733 Dtmf Operación de Discado AutomáticoDeclaración de Garantía Derechos de Autor del SoftwareSpanish

ML3245, ML3215 specifications

Legacy Car Audio offers a compelling lineup of speakers designed for audiophiles on a budget. Two notable models from their range are the ML3215 and ML3245, both of which showcase advanced technologies and robust features that cater to enhancing the in-car audio experience.

The Legacy ML3215 is a 3-way speaker system that integrates a 12-inch woofer, a 4-inch midrange driver, and a 1-inch tweeter. This combination allows for a wide frequency response, soaring highs, rich midrange, and deep bass, all essential for an immersive listening experience. The polypropylene cone material used in the woofer ensures durability while delivering powerful bass, while the rubber surround isolates and enhances sound quality effectively. Additionally, its built-in crossover network optimally divides frequencies between the drivers for clearer sound reproduction.

On the other hand, the ML3245 takes a slightly different approach. This model features two 4-inch speakers and two 1-inch tweeters, designed to provide balanced sound distribution throughout the vehicle. Its innovative design aims to fill larger spaces with crisp audio clarity, allowing passengers to enjoy an enriched listening experience regardless of their seating position. The ML3245 also incorporates a high-temperature voice coil that enhances performance, especially during prolonged playbacks.

Both speaker models boast a peak power handling capacity designed to handle high volumes without distortion. They also support a wide range of audio sources, making them suitable for use with various head units and amplifiers. In terms of installation, they are user-friendly, featuring a standard mounting depth that allows for easy fitting in most vehicles.

Moreover, Legacy Car Audio emphasizes customer satisfaction by backing their products with warranties, ensuring reliability and peace of mind. The aesthetic design of both the ML3215 and ML3245 is also worth mentioning, featuring a sleek profile that adds a touch of sophistication to any car interior.

In summary, the Legacy Car Audio ML3215 and ML3245 speakers stand out in the crowded car audio market by combining performance, durability, and affordability. These models reflect the brand’s commitment to delivering quality audio solutions that meet the needs of everyday drivers and dedicated audio enthusiasts alike. With these speakers, Legacy Car Audio continues to demonstrate its expertise in crafting sound solutions that elevate the in-car audio experience.
Top Page Image Contents