.
FIGURE 2. Rack Mount Configurations
2-Wire Audio Connections
RTS TW Audio Connections
1.Use standard TW intercom cables. Standard TW system cables can carry either one or two channels, while each hybrid in the DSI 2008 can only interface one TW channel to one 4-wire channel, which channel is determined by the front panel 2W CHAN SEL switch. If your TW system cable is only carrying one channel, or if you only need to connect one of two channels, connect directly to J1A (System A) or J1B (System B). If your TW system cable is carrying two channels, and you want to connect to both, use a TW-5W or similar device as shown in Figure 3 on page 8.
